Chrysler 2015 200 - Owner Manual Uživatelský manuál

200Chrysler Group LLC O W N E R ’ S M A N U A L2015 2 0 1 5 2 0 015UF-126-AA First Edition Printed in U.S.A.

WARNING! (Continued)seat belt for installing child seats in the outboardpositions. Please refer to “Installing The LATCH-Compatible Child Restraint Sy

3. Attach the lower hooks or connectors of the childrestraint to the lower anchorages in the selected seat-ing position.4. If the child restraint has

WARNING!• Improper installation of a child restraint to theLATCH anchorages can lead to failure of the re-straint. The child could be badly injured or

Lap/Shoulder Belt Systems For Installing ChildRestraints In This Vehicle• ALR = Switchable Automatic Locking Retractor•Top Tether Anchorage Symbol2THI

What is the weight limit (child’sweight + weight of the child re-straint) for using the Tether Anchorwith the seat belt to attach a forwardfacing chil

Installing A Child Restraint With A SwitchableAutomatic Locking Retractor (ALR)1. Place the child seat in the center of the seatingposition. For some

9. Test that the child restraint is installed tightly bypulling back and forth on the child seat at the seat beltpath. It should not move more than 1

1. Look behind the seating position where youplan to install the child restraint to find thetether anchorage. You may need to move theseat forward to

5. Remove slack in the tether strap according to the childrestraint manufacturer’s instructions.WARNING!• An incorrectly anchored tether strap could l

While cruising, brief full-throttle acceleration within thelimits of local traffic laws contributes to a good break-in.Wide-open throttle acceleration

THINGS TO KNOW BEFORE STARTING YOUR VEHICLECONTENTS! A WORD ABOUT YOUR KEYS ...12▫ Keyless Ignition Node (KIN) ...12▫ Key Fob . .

WARNING! (Continued)• It is extremely dangerous to ride in a cargo area,inside or outside of a vehicle. In a collision, peopleriding in these areas ar

Whenever a change is noticed in the sound of the exhaustsystem, when exhaust fumes can be detected inside thevehicle, or when the underside or rear of

DefrosterCheck operation by selecting the defrost mode and placethe blower control on high speed. You should be able tofeel the air directed against t

WARNING! (Continued)• Check mounting of mats on a regular basis. Alwaysproperly reinstall and secure floor mats that havebeen removed for cleaning.• A

Door LatchesCheck for positive closing, latching, and locking.Fluid LeaksCheck area under vehicle after overnight parking for fuel,engine coolant, oil

UNDERSTANDING THE FEATURES OF YOUR VEHICLECONTENTS! MIRRORS ...121▫ Inside Day/Night Mirror — If Equipped . . . .121▫ Automat

▫ Front Heated Seats — If Equipped ...145▫ Front Ventilated Seats — If Equipped ...147▫ Head Restraints ...147▫ Folding R

▫ Flash-To-Pass ...164▫ Front Map/Reading Lights ...164▫ Interior Lights ...165▫ Battery Saver Fea

▫ To Cancel ...185▫ To Turn Off . . . . . . . . . . . . . . . . . . . . . . . . . .186▫ To Resume ...18

! PARKSENSE® REAR PARK ASSIST — IFEQUIPPED ...218▫ ParkSense® Sensors ...219▫ ParkSense® Warning Display ...

▫ Using The Panic Alarm ...24▫ Programming Additional Transmitters ...25▫ Transmitter Battery Replacement ...25▫ General In

! OVERHEAD CONSOLE ...271▫ Front Map/Reading Lights ...271▫ Sunglass Bin Door ...273! GARAGE DOOR OPENER —

▫ Opening Sunroof — Manual Mode ...288▫ Closing Sunroof — Express...288▫ Closing Sunroof — Manual Mode ...288▫ Venting Sunroo

▫ Grocery Bag Hooks ...305▫ Ski Pass-Through...306! REAR WINDOW FEATURES ...306▫ Rear Window Defroster

MIRRORSInside Day/Night Mirror — If EquippedA single ball joint mirror is provided in the vehicle. It isa twist on mirror that has a fixed position at

left, and right for various drivers. The mirror should beadjusted to center on the view through the rear window.This mirror automatically adjusts for

NOTE: The ASSIST and 9–1–1 features operate throughthe Uconnect® Access service. These buttons will onlyoperate as long as your Uconnect® Access servi

3. Once a connection between the vehicle and a 9-1-1operator is made, the 9-1-1 Call system may transmitthe following important vehicle information to

WARNING!• If anyone in the vehicle could be in danger (e.g.,fire or smoke is visible, dangerous road conditionsor location), do not wait for voice con

WARNING! (Continued)• Modifications to any part of the 9-1-1 Call systemcould cause the air bag system to fail when youneed it. You could be injured i

WARNING! (Continued)• The Occupant Restraint Control module turns onthe Air Bag Warning Light on the instrument panelif a malfunction in any part of t

! SAFETY TIPS ...107▫ Transporting Passengers ...107▫ Exhaust Gas ...108▫ Safety Checks You

NOTE: Never place anything on or near the vehicle’swireless and GPS antennas. You could prevent wirelessand GPS signal reception, which can prevent yo

WARNING!Vehicles and other objects seen in the passenger sideconvex mirror will look smaller and farther awaythan they really are. Relying too much on

NOTE: The approach lighting will not function when theshift lever is moved out of the PARK position.Tilt Mirrors In Reverse (Available With MemorySeat

The power mirror controls consist of mirror select but-tons and a four-way mirror control switch. To adjust amirror, press either the L (left) or R (r

1. Fold down the sun visor.2. Unclip the visor from the center clip.3. Pull the sun visor toward the inside rearview mirror toextend it.BLIND SPOT MON

The BSM detection zone covers approximately one lanewidth on both sides of the vehicle (12 ft or 3.8 m). Thezone length starts at the outside rear vie

The area on the rear fascia where the radar sensors arelocated must remain free of snow, ice, and dirt/roadcontamination so that the BSM system can fu

Entering From The RearVehicles that come up from behind your vehicle on eitherside and enter the rear detection zone with a relativespeed of less than

The BSM system is designed not to issue an alert onstationary objects such as guardrails, posts, walls, foliage,berms, etc. However, occasionally the

WARNING!The Blind Spot Monitoring system is only an aid tohelp detect objects in the blind spot zones. The BSMsystem is not designed to detect pedestr

A WORD ABOUT YOUR KEYSYour vehicle uses a keyless ignition system. This systemconsists of a Key Fob with Remote Keyless Entry (RKE)transmitter and a K

RCP monitors the rear detection zones on both sides ofthe vehicle, for objects that are moving toward the side ofthe vehicle with a minimum speed of a

Modes Of OperationThree selectable modes of operation are available in theUconnect® System. Refer to “Uconnect® Settings/Customer Programmable Feature

NOTE: The BSM system will store the current operatingmode when the vehicle is shut off. Each time the vehicleis started the previously stored mode wil

Power Seats — If EquippedSome models may be equipped with a power driver’sseat. The power seat switch is located on the outboardside of the seat near

Reclining The Seatback Forward Or RearwardThe seatback can be reclined both forward and rearward.Push the seat recliner switch forward or rearward, th

Manual Seats — If EquippedManual Front Seat Forward/Rearward AdjustmentOn models equipped with manual seats, the adjustingbar is located at the front

WARNING!• Adjusting a seat while driving may be dangerous.Moving a seat while driving could result in loss ofcontrol which could cause a collision and

Manual Seat Height Adjustment — If EquippedThe driver’s seat height can be raised or lowered byusing a lever, located on the outboard side of the seat

NOTE: The engine must be running for the heated seatsto operate.Vehicles Equipped With Remote StartOn models that are equipped with remote start, theh

Front Ventilated Seats — If EquippedLocated in the seat cushion and seat back are small fansthat draw the air from the passenger compartment andmove a

Key FobThe Key Fob also contains the Remote Keyless Entry(RKE) transmitter and an emergency key, which stores inthe rear of the Key Fob.The emergency

WARNING!The head restraints for all occupants must be prop-erly installed and adjusted prior to operating thevehicle or occupying a seat. Head restrai

NOTE: The head restraints should only be removed byqualified technicians, for service purposes only. If eitherof the head restraints require removal,

To raise the head restraint, pull upward on the headrestraint. To lower the head restraint, press the pushbutton, located at the base of the head rest

When returning the rear seatback to the upright position,be sure the seatback is latched.WARNING!• Be certain that the seatback is securely locked int

Programming The Memory FeatureTo create a new memory profile, perform the following:NOTE: Saving a new memory profile will erase anexisting profile fr

NOTE:• Memory profiles can be set without the vehicle inPARK, but the vehicle must be in PARK to recall amemory profile.• To set a memory profile to y

4. Press and release the LOCK button on the RKEtransmitter within 10 seconds.NOTE: Your RKE transmitters can be unlinked to yourmemory settings by pre

The seat will return to its previously set position whenyou cycle the vehicles ignition to the ACC or RUNposition.• The Easy Entry/Easy Exit feature i

3. Reach under the center front edge of the hood andpush and hold the safety latch lever to the right.4. Lift the hood upward to the open position.Saf

CAUTION!To prevent possible damage, do not slam the hood toclose it. Use a firm downward push at the front centerof the hood to ensure that both latch

NOTE: You can insert the double-sided emergency keyinto the lock cylinders with either side up.Mechanical Latch On The Back Of The Key Fob Emergency K

Rotate the headlight switch clockwise to the first detentfor parking light and instrument panel light operation.Rotate the headlight switch to the sec

Headlights On With Wipers (Available WithAutomatic Headlights Only)When this feature is active, the headlights will turn onafter the wipers are turned

Automatic High Beam Headlamp Control — IfEquippedThe Automatic High Beam Headlamp Control systemprovides increased forward lighting at night by automa

NOTE: This system will not activate until the vehicle isat or above 15 mph (24 km/h).To Deactivate1. Pull the multifunction lever toward you (or rearw

Fog Lights — If EquippedThe front fog light switch is built into the headlightswitch.To activate the front fog lights, turn on the parkinglights or th

Turn SignalsMove the multifunction lever up or down and the arrowson each side of the instrument cluster flash to showproper operation of the front an

Lane Change AssistTap the lever up or down once, without moving beyondthe detent, and the turn signal (right or left) will flashthree times then autom

Front Map/Reading Lights — With Press LensesThe two map/reading lights can be operated indepen-dently by pressing the lenses.Press the lens once to tu

To protect the battery, the interior lights will turn offautomatically 10 minutes after the ignition is moved tothe LOCK position. This will occur if

Dome Light PositionRotate the instrument panel dimmer control completelyupward to the second detent to turn on the interior lights.The interior lights

Ignition Or Accessory On MessageOpening the driver’s door when the ignition is in ACC orON (engine not running), a chime will sound to remindyou to cy

WINDSHIELD WIPERS AND WASHERSThe windshield wiper/washer controls are located on thewindshield wiper/washer lever on the right side of thesteering col

NOTE: If snow packing occurs that obstructs the normaloperation of the windshield wipers the following mes-sage will appear in the Electronic Vehicle

NOTE: If the vehicle is moving less than 10 mph(16 km/h), delay times will be doubled.Windshield Washer OperationTo use the washer, pull the lever rea

If the lever is pulled while the wipers are in the offposition, the wipers will operate for several wipe cycles,then turn off.WARNING!Sudden loss of v

Rain Sensing Wipers — If EquippedThis feature senses moisture on the windshield andautomatically activates the wipers for the driver. Thefeature is es

• Transmission In NEUTRAL Position — When theignition is ON, and the automatic transmission is inthe NEUTRAL position, the Rain Sensing system willnot

To unlock the steering column, pull the control handledown. To tilt the steering column, move the steeringwheel upward or downward as desired. To leng

NOTE: The engine must be running for the heatedsteering wheel to operate.Vehicles Equipped With Remote StartOn models that are equipped with remote st

The Electronic Speed Control buttons are located on theright side of the steering wheel.NOTE: In order to ensure proper operation, the Elec-tronic Spe

WARNING!Leaving the Electronic Speed Control system onwhen not in use is dangerous. You could accidentallyset the system or cause it to go faster than

WARNING! (Continued)• Do not leave children or animals inside parkedvehicles in hot weather. Interior heat build-up maycause serious injury or death.C

The drivers preferred units can be selected through theinstrument panel settings if equipped. Refer to “Under-standing Your Instrument Panel” for more

• If the button is continually pressed, the set speed willcontinue to decrease until the button is released, thenthe new set speed will be established

ADAPTIVE CRUISE CONTROL (ACC) — IFEQUIPPEDAdaptive Cruise Control (ACC) increases the drivingconvenience provided by cruise control while travelingon

You can change the mode by using the Cruise Controlbuttons. The two control modes function differently.Always confirm which mode is selected.WARNING!•

WARNING! (Continued)You should switch off the ACC system:• When driving in fog, heavy rain, heavy snow, sleet,heavy traffic, and complex driving situa

NOTE: Any chassis/suspension or tire size modificationsto the vehicle will effect the performance of the AdaptiveCruise Control and Forward Collision

To Activate/DeactivatePush and release the Adaptive Cruise Control (ACC)ON/OFF button. The ACC menu in the EVIC/DIDdisplays “ACC Ready.”To turn the sy

WARNING!Leaving the Adaptive Cruise Control (ACC) systemon when not in use is dangerous. You could acciden-tally set the system or cause it to go fast

• The shift lever/gear selector is removed from theDrive position.• The Electronic Stability Control/Traction Control Sys-tem (ESC/TCS) activates.• Th

WARNING!The Resume function should only be used if trafficand road conditions permit. Resuming a set speedthat is too high or too low for prevailing t

If the Vehicle Security Light turns on during normalvehicle operation (vehicle running for longer than 10seconds), it indicates that there is a fault

• If the button is continually pressed, the set speed willcontinue to increase in 10 km/h increments until thebutton is released. The increase in set

• When you use the SET - button to decelerate, if theengine’s braking power does not slow the vehiclesufficiently to reach the set speed, the brake sy

Distance Setting 4 Bars (Longest) Distance Setting 3 Bars (Long)190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Distance Setting 2 Bars (Medium) Distance Setting 1 Bar (Short)3UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191

To increase the distance setting, press the Distance Set-ting — Increase button and release. Each time the buttonis pressed, the distance setting incr

NOTE: The “Brake!” Screen in the EVIC/DID is a warn-ing for the driver to take action and does not necessarilymean that the Forward Collision Warning

ACC Operation At StopIn the event that the ACC system brings your vehicle toa standstill while following a target vehicle, if the targetvehicle starts

Press the ADAPTIVE CRUISE CONTROL (ACC) ON/OFF button (located on the steering wheel) until one ofthe following displays in the EVIC/DID:Adaptive Crui

This most often occurs at times of poor visibility, such asin snow or heavy rain. The ACC system may also becometemporarily blinded due to obstruction

When the condition that deactivated the system is nolonger present, the system will return to the “AdaptiveCruise Control Off” state and will resume f

VEHICLES SOLD IN CANADAWith respect to any Vehicles Sold in Canada, the name ChryslerGroup LLC shall be deemed to be deleted and the name ChryslerCana

NOTE: When having the Sentry Key® Immobilizer Sys-tem serviced, bring all vehicle keys with you to anauthorized dealer.Customer Key ProgrammingProgram

If weather conditions are not a factor, the driver shouldexamine the windshield and the camera located on theback side of the inside rear view mirror.

Towing A TrailerTowing a trailer is not advised when using ACC.Offset DrivingACC may not detect a vehicle in the same lane that isoffset from your dir

the vehicle is out of the curve the system will resumeyour original Set Speed. This is a part of normal ACCsystem functionality.NOTE: On tight turns A

Lane ChangingACC may not detect a vehicle until it is completely in thelane in which you are traveling. In the illustration shown,ACC has not yet dete

Narrow VehiclesSome narrow vehicles traveling near the outer edges ofthe lane or edging into the lane are not detected until theyhave moved fully into

General InformationThis vehicle has systems that operate on radio frequencythat comply with Part 15 of the Federal CommunicationsCommission (FCC) rule

WARNING!In the normal Cruise Control mode, the system willnot react to vehicles ahead. In addition, the proximitywarning does not activate and no alar

U.S. Speed (mph)• Pressing the SET + button once will result ina1mphincrease in set speed. Each subsequent tap of thebutton results in an increase of

Metric Speed (km/h)• Pressing the SET - button once will result in a 1 km/hdecrease in set speed. Each subsequent tap of thebutton results in a decrea

FORWARD COLLISION WARNING (FCW) WITHMITIGATION — IF EQUIPPEDForward Collision Warning (FCW) With MitigationOperationThe Forward Collision Warning (FCW

To Arm The SystemFollow these steps to arm the Vehicle Security Alarm:1. Make sure the vehicle ignition is cycled to the #OFF#position. (refer to #Sta

When the system determines a collision with the vehiclein front of you is no longer probable, the warningmessage will be deactivated.NOTE:• The minimu

WARNING!Forward Collision Warning (FCW) is not intended toavoid a collision on its own, nor can FCW detectevery type of potential collision. The drive

• Changing the FCW status to “Off” prevents the systemfrom warning you of a possible collision with thevehicle in front of you.• Changing the FCW sens

NOTE:• The system will retain the last setting selected by thedriver after ignition shut down.• FCW may not react to irrelevant objects such asoverhea

LANESENSE — IF EQUIPPEDLaneSense OperationThe LaneSense system is operational at speeds above37 mph (60 km/h) and below 112 mph (180 km/h). TheLaneSen

Turning LaneSense ON Or OFFThe default status of LaneSense is “OFF”.The LaneSense button is located on the switch panelbelow the Uconnect® display.To

NOTE: The LaneSense system will retain the last systemstate ON or OFF from the last ignition cycle when theignition is changed to the ON/RUN position.

• When the LaneSense system senses the lane has beenapproached and is in a lane departure situation, theleft thick lane line flashes yellow (on/off),

• When the LaneSense system senses a lane drift situa-tion, the left thick lane line and left thin line turn solidyellow. The LaneSense indicator chan

• When the LaneSense system senses the lane has beenapproached and is in a lane departure situation, theleft thick lane line flashes yellow (on/off) a

• The Vehicle Security Alarm remains armed duringpower trunk entry. Pushing the trunk button will notdisarm the Vehicle Security Alarm. If someone ent

Changing LaneSense StatusThe LaneSense system settings can be configuredthrough the Uconnect® system screen.Follow these steps to change the LaneSense

ParkSense® can be active only when the shift lever/gearselector is in REVERSE. If ParkSense® is enabled at this shiftlever/gear selector position, the

The system will indicate a detected obstacle by showinga single arc in one or more regions based on the obstacle’sdistance and location relative to th

Slow Tone/Solid Arc Slow Tone/Solid Arc3UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221

The vehicle is close to the obstacle when the warningdisplay shows one flashing arc and sounds a continuoustone. The following chart shows the warning

WARNING ALERTSRear Distance(in/cm)Greaterthan79 in (200cm)79-59 in(200-150 cm)59-47 in(150-120cm)47-39 in(120-100cm)39-25 in(100-65cm)25-12 in(65-30 c

NOTE: ParkSense® will reduce the volume of the radio,if on, when the system is sounding an audio tone.Enabling And Disabling ParkSense®ParkSense® can

REVERSE and the system is disabled, the EVIC/DID willdisplay the “PARKSENSE OFF” message for as long asthe vehicle is in REVERSE.The ParkSense® switch

Cleaning The ParkSense® SystemClean the ParkSense® sensors with water, car wash soapand a soft cloth. Do not use rough or hard cloths. Do notscratch o

system misinterpreting a close object as a sensorproblem, causing the “PARKSENSE UNAVAILABLESERVICE REQUIRED” message to be displayed in theEVIC/DID.C

Security System Manual OverrideThe Vehicle Security Alarm will not arm if you lock thedoors using the manual door lock.ILLUMINATED ENTRYThe courtesy l

WARNING! (Continued)• Before using ParkSense®, it is strongly recom-mended that the ball mount and hitch ball assem-bly is disconnected from the vehic

• The automatic braking function may only be applied ifthe vehicle deceleration is not enough to avoid collid-ing with a detected obstacle.• The autom

until the vehicle speed is increased to approximately7 mph (11 km/h) or above. When in REVERSE and abovethe system’s operating speed, a warning will a

The ParkSense® Warning screen is located within theElectronic Vehicle Information Center (EVIC) or DriverInformation Display (DID). It provides visual

Single 1/2 Second Tone/Solid Arc Slow Tone/Solid Arc232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Slow Tone/Solid Arc Fast Tone/Flashing Arc3UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233

The vehicle is close to the obstacle when the warningdisplay shows one flashing arc and sounds a continuoustone. The following chart shows the warning

WARNING ALERTSRear Distance(in/cm)Greaterthan79 in (200cm)79-59 in(200-150 cm)59-47 in(150-120cm)47-39 in(120-100cm)39-25 in(100-65cm)25-12 in(65-30 c

NOTE: ParkSense® will reduce the volume of the radio,if on, when the system is sounding an audio tone.Front Park AssistWhen the vehicle is in DRIVE th

No Tone/Flashing Arc Fast Tone/Flashing Arc3UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237

• The Illuminated Entry system will not operate if thedimmer control is in the “Dome defeat” position(extreme bottom position).REMOTE KEYLESS ENTRY (R

The vehicle is close to the obstacle when the warningdisplay shows one flashing arc and sounds a continuoustone. The following chart shows the warning

WARNING ALERTSFront Distance(in/cm)Greater than47 in (120 cm)47-39 in(120-100 cm)39-25 in(100-65 cm)25-12 in(65-30 cm)Less than12 in (30 cm)Arcs — Lef

If the Uconnect® System is equipped, chime volumesettings will not be accessible from the EVIC/DID.The chime volume settings include LOW, MEDIUM, andH

REVERSE and the system is disabled, the EVIC/DID willdisplay the “PARKSENSE OFF” message for as long asthe vehicle is in REVERSE.The ParkSense® switch

vehicle is in REVERSE. Refer to “Electronic VehicleInformation Center (EVIC) or # Driver Information Dis-play (DID)” for further information.If #PARKS

• When you move the shift lever to the REVERSEposition and ParkSense® is turned off, the instrumentcluster will display “PARKSENSE OFF” for as long as

CAUTION! (Continued)• The vehicle must be driven slowly when usingParkSense® in order to be able to stop in timewhen an obstacle is detected. It is re

PARKSENSE® ACTIVE PARK ASSIST SYSTEM —IF EQUIPPEDThe ParkSense® Active Park Assist system is intended toassist the driver during parallel and perpendi

The system will also continuously perform the dy-namic vehicle calibration to account for differencessuch as over or under inflated tires and new tire

The ParkSense® Active Park Assist system will turn offautomatically for any of the following conditions:• The parking maneuver is completed.• Vehicle

To Unlock The DoorsPush and release the UNLOCK button on the RKEtransmitter once to unlock the driver’s door or twicewithin five seconds to unlock all

NOTE: If the vehicle is driven above approximately15 mph (25 km/h), the EVIC/DID will instruct the driverto slow down. If the vehicle is driven above

• The driver needs to make sure that the selectedparking space for the maneuver remains free and clearof any obstructions (e.g. pedestrians, bicycles,

When an available parking space has been found, and thevehicle is not in position, you will be instructed to moveforward to position the vehicle for a

to place the shift lever into the REVERSE position. When the driver places the shift lever into the REVERSEposition, the system may instruct the drive

The system will then instruct the driver to check theirsurroundings and move backward.NOTE:• It is the drivers responsibility to use the brake andacce

When the vehicle has reached the end of its backwardmovement, the system will instruct the driver to checktheir surroundings and stop the vehicle’s mo

When the driver places the shift lever into the DRIVEposition, the system may instruct the driver to wait forsteering to complete.The system will then

NOTE:It is the drivers responsibility to use the brake andstop the vehicle. The driver should check their surround-ings and be prepared to stop the ve

When the driver places the shift lever into the REVERSEposition, the system may instruct the driver to wait forsteering to complete.The system will th

Perpendicular Parking Space AssistanceOperation/DisplayWhen the ParkSense® Active Park Assist system isenabled, the “Active ParkSense Searching - Pres

Headlight Illumination On ApproachThis feature activates the headlights for up to 90 secondswhen the doors are unlocked with the RKE transmitter.The t

NOTE:• When searching for a parking space, use the turnsignal indicator to select which side of the vehicle youwant to perform the parking maneuver. T

Once the vehicle is in position, you will be instructed tostop the vehicle’s movement and remove your handsfrom the steering wheel.Once the vehicle is

When the driver places the shift lever into the REVERSEposition, the system may instruct the driver to wait forsteering to complete.The system will th

NOTE:•It is the drivers responsibility to use the brake andaccelerator during the semi-automatic parking maneuver.• When the system instructs the driv

NOTE: It is the drivers responsibility to use the brakeand stop the vehicle. The driver should check theirsurroundings and be prepared to stop the veh

The system will then instruct the driver to check theirsurroundings and move forward.When the vehicle has reached the end of its forwardmovement, the

NOTE: It is the drivers responsibility to use the brakeand stop the vehicle. The driver should check theirsurroundings and be prepared to stop the veh

When the driver places the shift lever into the REVERSEposition, the system may instruct the driver to wait forsteering to complete.The system will th

Parking Position# message will be momentarily dis-played.CAUTION!• The ParkSense® Active Park Assist system is onlya parking aid and it is unable to r

WARNING!• Drivers must be careful when performing parallelor perpendicular parking maneuvers even whenusing the ParkSense® Active Park Assist system.A

The Panic Alarm will stay on for three minutes unlessyou turn it off by either pushing the PANIC button asecond time or drive the vehicle at a speed o

PARKVIEW® REAR BACK UP CAMERA — IFEQUIPPEDYour vehicle may be equipped with the ParkView® RearBack Up Camera that allows you to see an on-screenimage

REVERSE unless the vehicle speed exceeds 8 mph(13 km/h), the vehicle is shifted into PARK or the ignitionis switched to the OFF position.A touch scree

NOTE: If snow, ice, mud, or any foreign substancebuilds up on the camera lens, clean the lens, rinse withwater, and dry with a soft cloth. Do not cove

OVERHEAD CONSOLEThe overhead console contains courtesy/reading lightsand storage for sunglasses. Power sunroof and powersunshade switches may also be

Front Map/Reading Lights — With Center ButtonsThere are two map/reading light buttons located in thecenter of the overhead console that allow the ligh

NOTE: The lights also turn on when a door is opened.The lights will also turn on when the UNLOCK button onthe RKE is pressed.Sunglass Bin DoorThe over

GARAGE DOOR OPENER — IF EQUIPPEDHomeLink® replaces up to three remote controls (hand-held transmitters) that operate devices such as garagedoor opener

WARNING!• Your motorized door or gate will open and closewhile you are training the universal transceiver. Donot train the transceiver if people, pets

To erase the channels place the ignition in the ON/RUNposition and push and hold the two outside HomeLink®buttons (I and III) for up 20 seconds or unt

1. Cycle the ignition to the ON/RUN position.2. Place the hand-held transmitter 1 to 3 inches (3 to 8cm) away from the HomeLink® button you wish topro

2. Insert the tip of the emergency key or a #2 flat bladescrewdriver into the slot and gently pry the two halvesof the RKE transmitter apart. Make sur

Reprogramming A Single HomeLink® Button(Rolling Code)To reprogram a channel that has been previously trained,follow these steps:1. Cycle the ignition

• To program the two remaining HomeLink® buttons,repeat each step for each remaining button. DO NOTerase the channels.Reprogramming A Single HomeLink®

2. Place the hand-held transmitter 1 to 3 inches (3 to 8cm) away from the HomeLink® button you wish toprogram while keeping the HomeLink® indicatorlig

3. Without releasing the button proceed with“Canadian/Gate Operator Programming” step 2 andfollow all remaining steps.Using HomeLink®To operate, push

WARNING!• Vehicle exhaust contains carbon monoxide, a dan-gerous gas. Do not run your vehicle in the garagewhile programming the transceiver. Exhaust

POWER SUNROOF — IF EQUIPPEDThe power sunroof switch is located between the sunvisors on the overhead console.WARNING!• Never leave children unattended

WARNING! (Continued)• Do not allow small children to operate the sunroof.Never allow your fingers, other body parts, or anyobject, to project through

Pinch Protect FeatureThis feature will detect an obstruction in the opening ofthe sunroof during Express Close operation. If an ob-struction in the pa

Sunroof MaintenanceUse only a non-abrasive cleaner and a soft cloth to cleanthe glass panel.Ignition Off OperationThe power sunroof switch will remain

WARNING!• Never leave children unattended in a vehicle, orwith access to an unlocked vehicle. Never leave theKey Fob in or near the vehicle, or in a l

new battery with your fingers. Skin oils may causebattery deterioration. If you touch a battery, clean itwith rubbing alcohol.4. To assemble the RKE t

WARNING! (Continued)• Do not allow small children to operate the sunroof.Never allow your fingers, other body parts, or anyobject, to project through

movement and the sunroof will remain in a partiallyclosed condition until the switch is pushed and heldforward again.Venting Sunroof — ExpressPress an

will close fully and stop automatically. This is called“Express Close”. During Express Close operation, anymovement of the switch will stop the shade.

Sunroof MaintenanceUse only a non-abrasive cleaner and a soft cloth to cleanthe glass panel.Ignition Off OperationThe power sunroof switch will remain

The front power outlet is located next to the storage areaon the center stack of the instrument panel.In addition to the front power outlet, there is

CAUTION!• Do not exceed the maximum power of 160 Watts (13Amps) at 12 Volts. If the 160 Watt (13 Amp) powerrating is exceeded the fuse protecting the

CAUTION! (Continued)• Accessories that draw higher power (i.e., coolers,vacuum cleaners, lights, etc.), will degrade thebattery even more quickly. Onl

To turn on the power outlet, simply plug in the device.The outlet automatically turns off when the device isunplugged.NOTE: Due to built-in overload p

CUPHOLDERSFront Seat CupholdersThe cupholders are located in the center console forwardof the armrest between the front seats.Rear Seat CupholdersThe

STORAGEGlove CompartmentThe glove compartment is located on the passenger sideof the instrument panel. Pull on the release handle toopen the glove com

TABLE OF CONTENTSSECTION PAGE1INTRODUCTION ...32THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

NOTE:• The vehicle must be equipped with an automatictransmission to be equipped with Remote Start.• Low fuel indicator must not be illuminated.• Obst

Console FeaturesThere is a storage compartment located under the centerconsole armrest.Pull upward on the release handle, located on the front ofthe a

NOTE: The center console cupholder can be placed inany position to maintain access to the storage area.Center Console Cupholder ReleaseFront Center Co

Located inside the center console storage compartment isa line that indicates how much storage is allowed.NOTE: Filling the console storage area above

Door StorageThe door panels contain storage areas with a bottleholder.Front Center Console Pass-ThroughFront Door Storage3UNDERSTANDING THE FEATURES O

Rear Seat Armrest Storage — If EquippedFor rear passengers there is a storage bin located in thearmrest. Lift upward on the latch to open the storagec

After releasing the seatback, it can be folded forward. When the seatback is folded to the upright position, makesure it is latched by strongly pullin

WARNING!• Be certain that the seatback is securely locked intoposition. If the seatback is not securely locked intoposition, the seat will not provide

Grocery Bag HooksThe rear cargo area is equipped with grocery bag hooks,located on either side of the rear cargo area.CAUTION!Do not exceed the maximu

Ski Pass-ThroughThere is a ski pass-through door located behind the rearseat armrest that allows longer items, such as snow skis,to be stored in the r

CAUTION!Failure to follow these cautions can cause damage tothe heating elements:• Use care when washing the inside of the rearwindow. Do not use abra

WARNING! (Continued)• Keep Remote Keyless Entry (RKE) transmittersaway from children. Operation of the Remote StartSystem, windows, door locks or othe

UNDERSTANDING YOUR INSTRUMENT PANELCONTENTS! INSTRUMENT PANEL FEATURES ...312! INSTRUMENT CLUSTER — BASE ...313! INSTRUMENT CLUSTER — PR

▫ Buttons On The Faceplate...371▫ Buttons On The Touchscreen...371▫ Customer Programmable Features/PersonalSettings — Uconnect

▫ Phone...422▫ Voice Text Reply ...423▫ Climate (8.4A/8.4AN) ...424▫ Navigation (8.4A/8.4

INSTRUMENT PANEL FEATURES1 — Air Outlet 6 — Radio Screen 11 — Steering Wheel2—EVIC/DIDControls 7—PassengerAirBag 12 — Hood Release3—InstrumentCluster

INSTRUMENT CLUSTER — BASE4UNDERSTANDING YOUR INSTRUMENT PANEL 313

INSTRUMENT CLUSTER — PREMIUM314 UNDERSTANDING YOUR INSTRUMENT PANEL

INSTRUMENT CLUSTER DESCRIPTIONS1. Red EVIC/DID Telltales2. Amber EVIC/DID Telltales3. Brake Warning LightThis light monitors various brake functions,i

WARNING!Driving a vehicle with the red brake light on isdangerous. Part of the brake system may have failed.It will take longer to stop the vehicle. Y

6. Adaptive Cruise Control (ACC) Distance Setting Dis-playThis will display the distance setting for theACC system. For further information, refer to“

NOTE:• If an engine fault is present or fuel level is low, thevehicle will start and then shut down in 10 seconds.• The park lamps will turn on and re

cycles, and the vehicle has been driven several miles(kilometers) at speeds greater than 30 mph (48 km/h), seeyour authorized dealer as soon as possib

by the vehicle manufacturer on the vehicle placard or tireinflation pressure label. If your vehicle has tires of adifferent size than the size indicat

replacement or alternate tires and wheels allow the TPMSto continue to function properly.CAUTION!The TPMS has been optimized for the originalequipment

14. Fuel Filler Door LocationThe fuel pump symbol points to the side of thevehicle where the fuel door is located.15. Fuel GaugeThe pointer shows the

Certain conditions, such as a loose or missing gas cap,poor fuel quality, etc., may illuminate the light afterengine start. The vehicle should be serv

21. Stop/Start Autostop ActivePush and release the UP or DOWN arrowbutton until the Stop/Start icon is highlightedin the EVIC/DID. Push and release th

CAUTION!Driving with a hot engine cooling system coulddamage your vehicle. If the temperature gauge reads“H” pull over and stop the vehicle. Idle the

U.S. Federal regulations require that upon transfer ofvehicle ownership, the seller certify to the purchaser thecorrect mileage that the vehicle has b

The EVIC Main Menu items consists of the following:• Speedometer• Vehicle Info• Fuel Economy Info• Trip (Trip A/Trip B)• Stop/Start — If Equipped• Aud

• DOWN Arrow ButtonPush and release the DOWN arrow button toscroll downward through the Main Menuitems (Speedometer, Vehicle Info, FuelEconomy, Trip A

DOOR LOCKSManual Door LocksTo lock each door, rotate the door lock knob on each doortrim panel forward. To unlock the front doors, pull theinside door

1. Electronic Park Brake Failure — If EquippedThis telltale indicates that there is an ElectronicPark Brake Fault. Please see your authorizeddealer fo

The dual brake system provides a reserve braking capac-ity in the event of a failure to a portion of the hydraulicsystem. A leak in either half of the

The light also will turn on when the parking brake isapplied with the ignition switch in the ON/RUN posi-tion.NOTE: This light shows only that the par

• Unstored MessagesThis message type is displayed indefinitely or untilthe condition that activated the message is cleared.Examples of this message ty

6. Fuel GaugeFuel Gauge displays the level of fuel in the fuel tankwhen the ignition switch is in the ON/RUN position.7. Low Fuel TelltaleWhen the fue

• Stop/Start Service IndicatorThis telltale will turn on to indicate theStop/Start system is not functioning prop-erly and service is required.• Servi

state. For further information, refer to “ElectronicSpeed Control” in “Understanding The Features OfYour Vehicle.”10. Reconfigurable Red Telltale Disp

If jump starting is required, refer to “Jump StartingProcedures” in “What To Do In Emergencies.”• Oil Pressure Warning LightThis light indicates low e

• Air Bag Warning LightThis light will turn on for four to eightseconds as a bulb check when the ignitionswitch is first turned to the ON/RUN po-sitio

WARNING!If you continue operating the vehicle when theTransmission Temperature Warning Light is illumi-nated you could cause the fluid to boil over, c

NOTE: The manual door locks will not lock or unlockthe trunk.WARNING!• For personal security and safety in the event of acollision, lock the vehicle d

WARNING!A hot engine cooling system is dangerous. You orothers could be badly burned by steam or boilingcoolant. You may want to call an authorized de

Instrument Cluster Messages For (EVIC) And (DID)• Front Seatbelts Unbuckled• Driver Seatbelt Unbuckled• Passenger Seatbelt Unbuckled• Service Airbag S

• Lights On• Right Turn Signal Light Out• Left Turn Signal Light Out• Turn Signal On• Vehicle Not in Park• Key in Ignition• Key in Ignition Lights On•

• Trans. Hot Stop Safely Shift to Park Wait to Cool• Transmission Cool Ready to Drive• Service Transmission• Service Shifter• Engage Park Brake to Pre

button to scroll through the information sub-menus andpush the OK button to select or reset the followingresettable sub-menus:Tire PressurePush and re

Fuel EconomyPush and release the UP or DOWN arrow button untilthe Fuel Economy icon is highlighted.• Average Fuel Economy/Miles Per Gallon (MPG orL/10

Screen SetupPush and release the UP or DOWN arrow button untilthe Screen Setup Menu displays in the EVIC/DID. Pushand release the OK button to enter t

SettingsTranslationMessageSubmenu10 RemoteUnlockSequenceRemoteUnlockDriver Door, AllDoors11 Key FobLinked toMemoryKey inMemoryOn, Off12 RemoteStartCom

SettingsTranslationMessageSubmenu19 RainSensingWipersAuto Wipers On, Off20 HeadlightsOff DelayLights OffDelay0 seconds, 30seconds, 60seconds, 90second

Screen Setup Driver Selectable Items1. Upper Left• None• Compass (default)• Outside Temp• Time• Range To Empty (RTE)• Average MPG• Current MPG2. Upper

If you push the power door lock switch while the ignitionis in the ACC or ON/RUN position, and any front dooris open, the power locks will not operate

• Current MPG• Trip A• Trip B• Audio Information• Menu Title (Default Setting)• Digital Speedo4. Current Gear• On• Off (Default)5. Defaults (defaults:

The DID Main Menu items consists of the following:• Speedometer• Vehicle Info• Driver Assist• Fuel Economy Info• Trip (Trip A/Trip B)• Stop/Start — If

• UP Arrow ButtonPush and release the UP arrow button to scrollupward through the main menu and sub-menus (Speedometer, Vehicle Info, Driver As-sist,

Driver Information Display (DID) - 7$ DisplayThe 7” DID displays are located in the center portion ofthe cluster.1. Red Reconfigurable Telltale Displa

• Door AjarThis light will turn on to indicate that oneor more doors may be ajar.• Decklid AjarThis light will turn on to indicate the deck-lid may be

• Electronic Throttle Control (ETC) LightThis light informs you of a problem withthe Electronic Throttle Control (ETC) sys-tem. The light will come on

• Transmission Temperature Warning LightThis light indicates that there is excessivetransmission fluid temperature that mightoccur with severe usage s

3. Amber Reconfigurable Telltale Display• Windshield Washer Fluid Low IndicatorThis telltale will turn on to indicate thewindshield washer fluid is lo

4. Brake Warning LightThis light monitors various brake functions,including brake fluid level and parking brakeapplication. If the brake light turns o

WARNING!Driving a vehicle with the red brake light on isdangerous. Part of the brake system may have failed.It will take longer to stop the vehicle. Y

3. The driver door is opened.4. The doors were not previously unlocked.Automatic Unlock Doors On Exit ProgrammingTo change the current setting, refer

and can be reviewed from the “Messages” mainmenu item. As long as there is a stored message, an“i” will be displayed in the middle of the DID’s toplin

• When the LaneSense Warning system is ON andready the lane lines and LaneSense Warning indica-tor are the color gray.• When the LaneSense Warning sys

• Electronic Speed Control SETThis light will turn on when the electronicspeed control is SET. For further informa-tion, refer to “Electronic Speed Co

and a sticker must be placed in the door jamb statingwhat the mileage was before the repair or service. Itis a good idea for you to make a record of t

WARNING!A hot engine cooling system is dangerous. You orothers could be badly burned by steam or boilingcoolant. You may want to call an authorized de

Unless reset, this message will continue to display eachtime the ignition is cycled to the ON/RUN position. Toturn off the message temporarily, push a

• Service Power Steering• Cruise Off• Cruise Ready• Cruise Set To XXX MPH• Cruise Set To XXX KM/H• Tire Pressure Screen With Low Tire(s) “Inflate Tire

• Remote Start Aborted Hood Open• Remote Start Aborted Tailgate Open• Remote Start Aborted Time Expired• Remote Start Disabled Start to Reset• Service

SpeedometerPush and release the UP or DOWN arrow button untilthe Speedometer Menu displays in the EVIC/DID. Pushand release the RIGHT arrow button to

Tire PSI is an information only function and cannot bereset. Push and release the LEFT arrow button to returnto the main menu.Refer to “Tire Pressure

WARNING!Avoid trapping anyone in a vehicle in a collision.Remember that the rear doors can only be openedfrom the outside when the Child-Protection lo

The ACC screen may display once again if any ACCactivity occurs, which may include any of the following:• Distance Setting Change• System Cancel• Driv

Trip InfoPush and release the UP or DOWN arrow button untilthe Trip Menu item is highlighted in the EVIC (Toggle leftor right to select Trip A or Trip

Uconnect® SETTINGSThe Uconnect® system uses a combination of buttons onthe touchscreen and buttons on the faceplate located onthe center of the instru

Buttons On The FaceplateButtons are located below the Uconnect® system in thecenter of the instrument panel. In addition, there is aScroll/Enter contr

Customer Programmable Features/PersonalSettings — Uconnect® 5.0/8.4A/8.4AN SettingsUconnect® 5.0 — If a SETTINGS button on the faceplateexists, push t

Auto or Manual button on the touchscreen. Then pressthe back arrow button on the touchscreen or push theback button on the faceplate.• Display Brightn

• Touchscreen BeepThis feature allows you to turn on or shut off the soundheard when a touchscreen button is pressed. Press the“Touchscreen Beep” butt

check-mark appears next to the setting, showing thatsetting has been selected. Press the back arrow button onthe touchscreen to return to the previous

Safety & Driving AssistanceAfter pressing the “Safety & Driving Assistance” buttonon the touchscreen the following settings will be avail-able

• LaneSense Warning — If EquippedWhen this feature is selected, it sets the distance at whichthe steering wheel will provide feedback for potentiallan

• If wearing gloves on your hands, or if it has beenraining on the Passive Entry door handle, the unlocksensitivity can be affected, resulting in a sl

• Rear ParkSense® Volume — If EquippedRear ParkSense® volume settings can be selected fromthe EVIC/DID or Uconnect® System (if equipped). Thechime vol

selected, the Blind Spot Monitor (BSM) system is deacti-vated. To change the Blind Spot Alert status, press the“Off,” “Lights” or “Lights & Chime”

appears next to the setting, showing that setting has beenselected. Press the back arrow button on the touchscreento return to the previous menu.• Ele

• Headlight Illumination On ApproachWhen this feature is selected, the headlights will activateand remain on for 0, 30, 60, or 90 seconds when the doo

press the Daytime Running Lights button on the touch-screen, until a check-mark appears next to setting, indi-cating that the setting has been selecte

• Flash Lights With LockWhen this feature is selected, the exterior lights will flashwhen the doors are locked or unlocked with the RemoteKeyless Entr

UNLOCK button twice to unlock the passenger’s doors.When #All Doors# is selected for 1st Press Of Key FobUnlocks, all doors will unlock on the first p

NOTE: The seat will return to the memorized seatlocation (if Recall Memory with Remote Key Unlock is setto ON) when the Remote Keyless Entry (RKE) tra

• Engine Off Power DelayWhen this feature is selected, the power windowswitches, radio, Uconnect® Phone system (if equipped),DVD video system (if equi

NOTE: Bass/Mid/Treble allow you to simply slide yourfinger up or down to change the setting as well as pressdirectly on the desired setting.• Speed Ad

NOTE: If “1st Press Of Key Fob Unlocks All Doors” isprogrammed, all doors will unlock when you grab holdof the drivers door handle. To select between

SiriusXM SetupAfter pressing the SIRIUS Setup button on the touch-screen the following settings will be available.• Channel SkipSiriusXM can be progra

Restore SettingsAfter pressing the “Restore Settings” button on thetouchscreen the following settings will be available:• Restore SettingsWhen this fe

iPod®/USB/MP3 CONTROL — IF EQUIPPEDLocated in the front storage area of the center console,this feature allows an iPod®/MP3 player, or an externalUSB

The right-hand control is a rocker-type switch with apushbutton in the center and controls the volume andmode of the sound system. Pushing the top of

Media ModePushing the top of the switch once will go to the nexttrack on the selected media (Disc, AUX, Bluetooth®).Pushing the bottom of the switch o

Front Blower ControlThere are seven blower speeds. Usethis control to regulate the amount ofair forced through the system in anymode you select. The b

Air Conditioning OperationPush the A/C button to engage the Air Conditioning(A/C). A LED will illuminate when the A/C system isengaged.MAX A/CFor maxi

Bi-Level ModeAir is directed through the panel and floor outlets.NOTE: There is a difference in temperature (inany conditions other than full cold or

Recirculation ControlPush this button to choose between outside air intake orrecirculation of the air inside the vehicle. A LED willilluminate when yo

Economy ModeIf ECONOMY mode is desired, push the A/C button toturn off the LED indicator and the A/C compressor.Rotate the temperature control knob to

NOTE: The vehicle will only unlock the doors when thedoors are locked using the door panel switch, a validPassive Entry RKE transmitter is detected in

Buttons On Your Uconnect® TouchscreenButtons on the touchscreen are accessible on theUconnect® system screen.Uconnect® 5.0 Manual Temperature Controls

Button Descriptions (Applies To Both The Buttons OnYour Faceplate And The Buttons On Your Touchscreen)1. MAX A/C ButtonPress to change the current set

CAUTION!Failure to follow these cautions can cause damage tothe heating elements:•Use care when washing the inside of the rearwindow. Do not use abras

7. ModesThe airflow distribution mode can be adjusted so aircomes from the instrument panel outlets, floor outlets,demist outlets and defrost outlets.

NOTE: The air conditioning compressor operates in MIXand DEFROST modes even if the A/C button is notpressed. This dehumidifies the air to help dry the

Automatic Climate Controls With Touchscreen —If EquippedButtons On Your Uconnect® FaceplateButtons On Your Uconnect® TouchscreenButtons on your touchs

Button Descriptions (Applies To Both The Buttons OnYour Faceplate And The Buttons On Your Touchscreen)1. MAX A/C ButtonPress to change the current set

5. Front Defrost ButtonPress to change the current airflow setting to Defrostmode. The indicator illuminates when this feature is ON.Air comes from th

7. Passenger Temperature Control Up Button(Uconnect® 8.4)Provides the passenger with independent temperaturecontrol. Press the button on the faceplate

Knob On Your FaceplateThe blower speed increases as you turn the knob clock-wise from the lowest blower setting. The blower speeddecreases as you turn

Push The Door Handle Button To Lock Do NOT Grab The Handle When Locking2THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39

• Floor ModeAir comes from the floor outlets. A slight amountof air is directed through the defrost and sidewindow demister outlets.• Mix ModeAir come

15. Temperature Control (Uconnect® 5.0)Press the temperature button on the touchscreen toregulate the temperature of the air inside the passengercompa

In MAX A/C, the blower level and mode position can beadjusted to desired user settings. Pushing other settingswill cause the MAX A/C operation to swit

2. Next, adjust the temperature you would like thesystem to maintain by adjusting the driver and pas-senger temperature hard or soft control buttons.

The operator can also select the direction of the airflowby selecting one of the available mode settings. A/Coperation and Recirculation control can a

Vacation/StorageAny time you store your vehicle or keep it out of service(i.e., vacation) for two weeks or more, run the airconditioning system at idl

Control Setting Suggestions For Various Weather Conditions414 UNDERSTANDING YOUR INSTRUMENT PANEL

Uconnect® VOICE RECOGNITION QUICK TIPSIntroducing Uconnect®Start using Uconnect® Voice Recognition with thesehelpful quick tips. It provides the key V

If you see theicon on your touchscreen, you havethe Uconnect® 8.4AN system. If not, you have aUconnect® 8.4A system.Get StartedAll you need to control

4. Each time you give a Voice Command, you must firstpush either the VR or Phone button, wait until afterthe beep, then say your Voice Command.5. You

NOTE:• After pushing the door handle LOCK button, youmust wait two seconds before you can lock or unlockthe doors, using either Passive Entry door han

Basic Voice CommandsThe basic Voice Commands below can be given at anypoint while using your Uconnect® system.Push the VR button. After the beep, say%

RadioUse your voice to quickly get to the AM, FM or SiriusXMSatellite Radio® stations you would like to hear. (Sub-scription or included SiriusXM Sate

Uconnect® 5.0 Radio Uconnect® 8.4A/8.4AN Radio420 UNDERSTANDING YOUR INSTRUMENT PANEL

MediaUconnect® offers connections via USB, SD, Bluetooth®and auxiliary ports (If Equipped). Voice operation is onlyavailable for connected USB and iPo

PhoneMaking and answering hands-free phone calls is easywith Uconnect®. When the Phonebook button is illumi-nated on your touchscreen, your system is

TIP: When providing a Voice Command, push thePhone buttonand say “Call,” then pronounce thename exactly as it appears in your phone book. Whena contac

1. Once an incoming text message is read to you, pushthe Phone button. After the beep, say: “Reply.”2. Listen to the Uconnect® prompts. After the beep

TIP: Voice Command for Climate may only be used toadjust the interior temperature of your vehicle. VoiceCommand will not work to adjust the heated sea

Uconnect® Access* (8.4A/8.4AN)An included trial and/or subscription is required to takeadvantage of the Uconnect® Access services in the nextsection o

Roadside Assistance CallWi-Fi Hotspot*****If vehicle is equipped.***Extra charges apply.Register (8.4A/8.4AN)1. Press the Apps button on the bottom of

There are single window controls on each passenger doortrim panel, which operate the passenger door windows.The window controls will operate only when

Mobile App (8.4A/8.4AN)Securely link your mobile device to your vehicle with theUconnect® Access App. Once you have downloaded theApp, you may start y

2. Listen to the prompt. After the beep, dictate themessage you would like to send. Wait for Uconnect®to process your message.3. The Uconnect® system

TIP: Once you perform a search, you can reorganize theresults by selecting either the Best Match, Rating orDistance tab on the top of the touchscreen

Additional Information© 2014 Chrysler Group LLC. All rights reserved. Moparand Uconnect are registered trademarks and MoparOwner Connect is a trademar

STARTING AND OPERATINGCONTENTS! STARTING PROCEDURES ...438▫ Normal Starting...438▫ Extreme Cold Weather(Below –20°F O

! AUTOMATIC TRANSMISSION ...447▫ Key Ignition Park Interlock...449▫ Brake/Transmission Shift Interlock System . . .449▫ Nine-Spee

▫ Hill Start Assist (HSA) ...480▫ Ready Alert Braking ...481▫ Rain Brake Support ...481▫ ESC Activation

▫ Premium System — If Equipped ...516▫ General Information ...520! FUEL REQUIREMENTS ...521▫ Reformulated Gasol

▫ Towing This Vehicle Behind Another Vehicle . .535▫ Recreational Towing — Front-Wheel Drive (FWD)Models ...535▫ Recreational

Front Windows Express Up And Down — IfEquippedExpress DownPush the switch to the second detent and release. Thewindow will go down automatically.Manua

STARTING PROCEDURESBefore starting your vehicle, adjust your seat, adjust bothinside and outside mirrors, and fasten your seat belts.WARNING!• When le

Cycle the ignition switch to the START position andrelease when the engine starts. If the engine fails to startwithin 10 seconds, cycle the ignition s

CAUTION!To prevent damage to the starter, do not continuouslycrank the engine for more than 10 seconds at a time.Wait 10 to 15 seconds before trying a

With Tip StartIf the engine fails to start after you have followed the#Normal Starting#, “Extreme Cold Weather# and #Ex-tended Park Starting# procedur

To Activate The Autostop Mode, The Following MustOccur:• The system must be in STOP/START READY state. ASTOP/START READY message will be displayed int

• Cabin heating or cooling is in process and an accept-able cabin temperature has not been achieved.• HVAC is set to full defrost mode at a high blowe

Conditions That Will Cause The Engine To Start Auto-matically While In Autostop Mode:• The transmission selector is moved from DRIVE toREVERSE.• To ma

To Manually Turn Off The Stop/Start System1. Press the STOP/START Off switch (located on theswitch bank). The light on the switch will illuminate.2. T

Information Center (EVIC)” or “Driver Information Dis-play (DID)” in “Understanding Your Instrument Panel”for further information.If the “SERVICE STOP

NOTE:• The engine block heater cord is a factory installedoption. If your vehicle is not equipped, heater cordsare available from your authorized MOPA

Reset Auto-UpShould the Auto Up feature stop working, the windowmay need to be reset. To reset Auto Up:1. Make sure the door is fully closed.2. Pull t

WARNING!• It is dangerous to shift out of PARK or NEUTRALif the engine speed is higher than idle speed. Ifyour foot is not firmly pressing the brake p

WARNING! (Continued)• Never leave children alone in a vehicle, or withaccess to an unlocked vehicle. Allowing children tobe in a vehicle unattended is

Nine-Speed Automatic TransmissionThe transmission is controlled using a rotary electronicgear selector located on the center console. The transmis-sio

Premium Shifter with Shift PaddlesThe premium transmission gear selector (with manualshift paddles mounted on the steering wheel) providesPARK, REVERS

PARK (P)This range supplements the parking brake by locking thetransmission. The engine can be started in this range.Never attempt to use PARK while t

WARNING! (Continued)• Unintended movement of a vehicle could injurethose in or near the vehicle. As with all vehicles,you should never exit a vehicle

CAUTION!• Before moving the transmission gear selector out ofPARK, you must start the engine and also press thebrake pedal. Otherwise, damage to the g

CAUTION!Towing the vehicle, coasting, or driving for any otherreason with the transmission in NEUTRAL can causesevere transmission damage. Refer to “R

During cold temperatures, transmission operation maybe modified depending on engine and transmissiontemperature as well as vehicle speed. This feature

In the event of a momentary problem, the transmissioncan be reset to regain all forward gears by performing thefollowing steps:1. Stop the vehicle.2.

TRUNK LOCK AND RELEASEThe trunk lid can be released from inside the vehicle bypushing the TRUNK RELEASE button located on theinstrument panel to the l

NOTE: The torque converter clutch will not engage untilthe transmission fluid is warm (usually after 1 to 3 miles[2 to 5 km] of driving). Because the

• If Paddle Shift is engaged while in DRIVE mode, thetransmission will automatically shift up when maxi-mum engine speed is reached. Lack of accelerat

WARNING!Do not downshift for additional engine braking on aslippery surface. The drive wheels could lose theirgrip and the vehicle could skid, causing

WARNING!Rapid acceleration on slippery surfaces is dangerous.Unequal traction can cause sudden pulling of thefront wheels. You could lose control of t

Flowing/Rising WaterWARNING!Do not drive on or across a road or path where wateris flowing and/or rising (as in storm run-off). Flow-ing water can wea

CAUTION!• Always check the depth of the standing waterbefore driving through it. Never drive throughstanding water that is deeper than the bottom ofth

POWER STEERINGThe electric power steering system will give you goodvehicle response and increased ease of maneuverabilityin tight spaces. The system w

(EVIC)/Driver Information Display (DID)” in “Under-standing Your Instrument Panel” for further information.NOTE:• Even if the power steering assistanc

To apply the parking brake manually, pull up on theswitch momentarily. You may hear a slight whirringsound from the back of the vehicle while the park

The parking brake will release automatically when theignition is cycled to the RUN position, the transmission isin DRIVE or REVERSE, the driver seat b

TRUNK SAFETY WARNINGWARNING!Do not allow children to have access to the trunk,either by climbing into the trunk from outside, orthrough the inside of

WARNING! (Continued)• Never leave children alone in a vehicle, or withaccess to an unlocked vehicle. Allowing children tobe in a vehicle unattended is

If exceptional circumstances should make it necessary toengage the parking brake while the vehicle is in motion,maintain upward pressure on the electr

the vehicle is left unsecured. If the automatic transmis-sion is not in PARK, the seat belt is unbuckled, the driverdoor is open, the vehicle is at a

While in service mode, the Electric Parking Brake faultlamp will flash continuously while the ignition switch isON.When brake service work is complete

ELECTRONIC BRAKE CONTROL SYSTEMYour vehicle is equipped with an advanced electronicbrake control system. This system includes Anti-LockBrake System (A

WARNING! (Continued)• The capabilities of an ABS-equipped vehicle mustnever be exploited in a reckless or dangerousmanner, which could jeopardize the

ABS is activated during braking under certain road orstopping conditions. ABS inducing conditions can in-clude ice, snow, gravel, bumps, railroad trac

Traction Control System (TCS)This system monitors the amount of wheel spin of each ofthe driven wheels. If wheel spin is detected, brakepressure is ap

WARNING!Many factors, such as vehicle loading, road condi-tions, and driving conditions, influence the chancethat wheel lift or rollover may occur. ER

WARNING! (Continued)• The capabilities of a BAS-equipped vehicle mustnever be exploited in a reckless or dangerousmanner, which could jeopardize the u

OCCUPANT RESTRAINTS SYSTEMSSome of the most important safety features in yourvehicle are the restraint systems:• Seat Belt Systems• Supplemental Restr

WARNING! (Continued)from loss of vehicle control due to inappropriatedriver input for the conditions. Only a safe, attentive,and skillful driver can p

To turn ESC on again, momentarily press the “ESC Off”switch. This will restore the normal “ESC On” mode ofoperation.WARNING!When in “Partial Off” mode

Hill Start Assist (HSA)The HSA system is designed to assist the driver whenstarting a vehicle from a stop on a hill. HSA will maintainthe level of bra

HSA OffIf you wish to turn off the HSA system, it can be done inthe Uconnect® settings. Refer to #Uconnect® Settings# in#Understanding Your Instrument

malfunction has been detected in the ESC system. If thislight remains on after several ignition cycles, and thevehicle has been driven several miles (

TIRE SAFETY INFORMATIONTire MarkingsNOTE:• P (Passenger) — Metric tire sizing is based on U.S.design standards. P-Metric tires have the letter “P”mold

• Temporary spare tires are designed for temporaryemergency use only. Temporary high pressure com-pact spare tires have the letter “T” or “S” molded i

Tire Sizing ChartEXAMPLE:Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15LTP = Passenger car tire

EXAMPLE:– #D# means diagonal or bias construction15, 16, 18 = Rim diameter in inches (in)Service Description:95 = Load Index– A numerical code associa

EXAMPLE:Load Identification:Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL)tire:•XL =

7. The driver and front passenger seats should be movedback as far as practical to allow the Advanced FrontAir Bags room to inflate.8. Do not lean aga

Tire Identification Number (TIN)The TIN may be found on one or both sides of the tire,however, the date code may only be on one side. Tireswith white

EXAMPLE:DOT MA L9 ABCD 030101 = Number representing the year in which the tire was manufactured (two digits)– 01 means the year 2001– Prior to July 20

Tire Terminology And DefinitionsTerm DefinitionB-Pillar The vehicle B-Pillar is the structural member of the body locatedbehind the front door.Cold Ti

Tire Loading And Tire PressureTire And Loading Information Placard LocationNOTE: The proper cold tire inflation pressure is listed onthe driver’s side

Tire And Loading Information PlacardThis placard tells you important information about the:1. Number of people that can be carried in the vehicle.2. T

To determine the maximum loading conditions of yourvehicle, locate the statement “The combined weight ofoccupants and cargo should never exceed XXX lb

NOTE:• If your vehicle will be towing a trailer, load from yourtrailer will be transferred to your vehicle. The follow-ing table shows examples on how

5STARTING AND OPERATING 495

WARNING!Overloading of your tires is dangerous. Overloadingcan cause tire failure, affect vehicle handling, andincrease your stopping distance. Use ti

WARNING! (Continued)• Unequal tire pressures from one side of the vehicleto the other can cause the vehicle to drift to theright or left.• Always driv

INTRODUCTIONCONTENTS! INTRODUCTION ...4! HOW TO USE THIS MANUAL ...4! WARNINGS AND CAUTIONS ...6! VEHICLE I

ejection and the risk of injury caused by striking theinside of the vehicle. Everyone in a motor vehicle shouldbe belted at all times.Enhanced Seat Be

At least once a month:•Check and adjust tire pressure with a good qualitypocket-type pressure gauge. Do not make a visual judge-ment when determining

Tire Pressures For High Speed OperationThe manufacturer advocates driving at safe speeds andwithin posted speed limits. Where speed limits or condi-ti

Consult an authorized tire dealer for tire repairs andadditional information.Damaged Run Flat tires, or Run Flat tires that haveexperienced a loss of

WARNING!Do not use summer tires in snow/ice conditions. Youcould lose vehicle control, resulting in severe injuryor death. Driving too fast for condit

Run Flat tire reaches the run flat mode it has limiteddriving capabilities and needs to be replaced immedi-ately. A Run Flat tire is not repairable.It

Compact Spare Tire — If EquippedThe compact spare is for temporary emergency use only.You can identify if your vehicle is equipped with acompact spare

spare tire needs to be replaced. Since it is not the same asyour original equipment tire, replace (or repair) theoriginal equipment tire and reinstall

Refer to “Freeing A Stuck Vehicle” in “What To Do InEmergencies” for further information.WARNING!Fast spinning tires can be dangerous. Forces gener-at

worn to the tread wear indicators, the tire should bereplaced. Refer to “Replacement Tires” in this section forfurther information.Life Of TireThe ser

Information placard or the Vehicle Certification Label forthe size designation of your tire. The Load Index andSpeed Symbol for your tire will be foun

NOTE: If BeltAlert has been deactivated, the Seat BeltReminder Light will continue to illuminate while thedriver’s or outboard front passenger’s (if e

WARNING! (Continued)• Failure to equip your vehicle with tires havingadequate speed capability can result in sudden tirefailure and loss of vehicle co

CAUTION!To avoid damage to your vehicle or tires, observe thefollowing precautions:• Because of restricted traction device clearance be-tween tires an

These effects can be reduced by timely rotation of tires.The benefits of rotation are especially worthwhile withaggressive tread designs such as those

The tire pressure will vary with temperature by about 1psi (7 kPa) for every 12°F (6.5°C). This means that whenthe outside temperature decreases, the

For example, your vehicle may have a recommendedcold (parked for more than three hours) placard pressureof 33 psi (227 kPa). If the ambient temperatur

CAUTION! (Continued)• After inspecting or adjusting the tire pressure,always reinstall the valve stem cap. This willprevent moisture and dirt from ent

NOTE: It is particularly important for you to check thetire pressure in all of the tires on your vehicle monthlyand to maintain the proper pressure.Th

Service TPMS WarningWhen a system fault is detected, the “Tire PressureMonitoring Telltale Light” will flash on and off for 75seconds and then remain

4. For each subsequent ignition cycle, a chime will soundand the “TPMS Telltale Light” will flash on and off for75 seconds and then remain on solid.5.

Display (DID) will display an #Inflate to XX# message anda graphic showing the pressure values of each tire withthe low tire pressure values in a diff

WARNING! (Continued)• Do not allow people to ride in any area of yourvehicle that is not equipped with seats and seatbelts.• Be sure everyone in your

If the ignition is cycled, this sequence will repeat, pro-viding the system fault still exists. If the system fault nolonger exists, the “Tire Pressur

2. If you install the full size spare in place of a road tirethat has a pressure below the low-pressure warninglimit, a chime will sound and the “TPMS

4. For each subsequent ignition cycle, a chime willsound, the “TPMS Telltale Light” will flash on and offfor 75 seconds and then remain on solid, and

FUEL REQUIREMENTSAll engines are designed to meet all emis-sions regulations and provide excellentfuel economy and performance when us-ing high-qualit

Gasoline/Oxygenate BlendsSome fuel suppliers blend unleaded gasoline with oxy-genates such as Ethanol.CAUTION!DO NOT use gasoline containing Methanol

To fix a Non-FFV vehicle inadvertently fueled once withE-85 perform the following:• Drain the fuel tank (see your authorized dealer).• Change the engi

Fuel System CautionsCAUTION!Follow these guidelines to maintain your vehicle’sperformance:• The use of leaded gas is prohibited by Federal law.Using l

Carbon Monoxide WarningsWARNING!Carbon monoxide (CO) in exhaust gases is deadly.Follow the precautions below to prevent carbonmonoxide poisoning:• Do

E-85 Fuel Cap E-85 Badge526 STARTING AND OPERATING

Ethanol Fuel (E-85)E-85 is a mixture of approximately 85% fuel ethanol and15% unleaded gasoline.WARNING!Ethanol vapors are extremely flammable and cou

WARNING! (Continued)• A seat belt that is too loose will not protect youproperly. In a sudden stop, you could move too farforward, increasing the poss

• Some additives used in regular gasoline are not fullycompatible with E-85 and may form deposits in yourengine. To eliminate driveability issues that

Replacement PartsMany components in your Flexible Fuel Vehicle (FFV) aredesigned to be compatible with ethanol. Always be surethat your vehicle is ser

WARNING!• Never have any smoking materials lit in or near thevehicle when the gas cap is removed or the tank isbeing filled.• Never add fuel when the

3. Remove the fuel filler cap and hang fuel filler cap bytether on fuel fill door to prevent damage to body side.4. After you have stopped pumping fue

Loose Fuel Filler Cap MessageIf the vehicle diagnostic system determines that the fuelfiller cap is loose, improperly installed, or damaged, a“CHECK G

PayloadThe payload of a vehicle is defined as the allowable loadweight a truck can carry, including the weight of thedriver, all passengers, options a

LoadingThe actual total weight and the weight of the front andrear of your vehicle at the ground can best be determinedby weighing it when it is loade

RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.)Towing This Vehicle Behind Another VehicleTowing Condition Wheel OFF the GroundFront-Wheel Drive(FWD) Mode

5. Release the parking brake.CAUTION!• DO NOT flat tow this vehicle. Damage to thedrivetrain will result. If this vehicle requires tow-ing, make sure

WHAT TO DO IN EMERGENCIESCONTENTS! HAZARD WARNING FLASHERS ...539! IF YOUR ENGINE OVERHEATS ...539! WHEEL AND TIRE TORQUESPECIFICATIO

2. The seat belt latch plate is above the back of the frontseat, and next to your arm in the rear seat (for vehiclesequipped with a rear seat). Grasp

! TOWING A DISABLED VEHICLE ...575▫ Front-Wheel Drive (FWD) Models ...577▫ All-Wheel Drive (AWD) Models ...578538 WHAT TO DO IN

HAZARD WARNING FLASHERSThe Hazard Warning flasher switch is located in theswitch bank below the radio screen.Press the switch to turn on the Hazard Wa

CAUTION!Driving with a hot cooling system could damageyour vehicle. If the temperature gauge reads “H,”pull over and stop the vehicle. Idle the vehicl

Tighten the lug nuts/bolts in a star pattern until eachnut/bolt has been tightened twice.After 25 miles (40 km) check the lug nut/bolt torque to besur

WARNING!To avoid the risk of forcing the vehicle off the jack,do not tighten the lug nuts fully until the vehicle hasbeen lowered. Failure to follow t

3. Remove the fastener securing the Tire Service Kit. 4. Remove Tire Service Kit.Tire Service Kit Fastener Tire Service Kit6WHAT TO DO IN EMERGENCIES

Tire Service Kit Components And Operation1 — Sealant Bottle 5 — Mode Select Knob2 — Deflation Button 6 — Sealant Hose (Clear)3 — Pressure Gauge 7 — Ai

• The Sealant Bottle (1) and Sealant Hose (6) are a onetire application use and need to be replaced after eachuse. Always replace these components imm

WARNING!• Do not attempt to seal a tire on the side of thevehicle closest to traffic. Pull far enough off theroad to avoid the danger of being hit whe

WARNING! (Continued)• Tire Service Kit Sealant solution contains latex. Incase of an allergic reaction or rash, consult a phy-sician immediately. Keep

plate and pull on the lap belt. A snug seat belt reducesthe risk of sliding under the seat belt in a collision.5. Position the shoulder belt across th

4. Remove the cap from the valve stem and then screwthe fitting at the end of the Sealant Hose (6) onto thevalve stem.5. Uncoil the Power Plug (8) and

NOTE: If the Mode Select Knob (5) is on Air Mode andthe pump is operating, air will dispense from the AirPump Hose (7) only, not the Sealant Hose (6).

3. Immediately disconnect the Sealant Hose (6) from thevalve stem, reinstall the cap on the fitting at the end ofthe hose, and place the Tire Service

(E) After Driving:Pull over to a safe location. Refer to “Whenever You Stopto Use Tire Service Kit” before continuing.1. Push in the Mode Select Knob

5. Replace the Sealant Bottle (1) and Sealant Hose (6)assembly at your authorized dealer as soon as pos-sible. Refer to (F) “Sealant Bottle and Hose R

JACKING AND TIRE CHANGINGWARNING!• Do not attempt to change a tire on the side of thevehicle close to moving traffic. Pull far enough offthe road to a

3. Remove the fastener securing the jack and spare tire. 4. Remove the scissors jack, wheel bolt wrench andwheel chocks from the spare wheel as an ass

5. Remove the spare tire.WARNING!A loose tire or jack thrown forward in a collision orhard stop could endanger the occupants of the ve-hicle. Always s

NOTE: Passengers should not remain in the vehiclewhen the vehicle is being jacked.Jacking InstructionsWARNING!Carefully follow these tire changing war

CAUTION!Do not attempt to raise the vehicle by jacking onlocations other than those indicated in the JackingInstructions for this vehicle.1. Remove th

4. Continue to slide the latch plate up until it clears thefolded webbing and the seat belt is no longer twisted.Adjustable Upper Shoulder Belt Anchor

2. If equipped with aluminum wheels where the centercap covers the wheel bolts, use the wheel bolt wrenchto pry the center cap off carefully before ra

Rear Body Flange Front Body Flange Engaged6WHAT TO DO IN EMERGENCIES 559

5. Turn the jack screw clockwise to firmly engage thejack saddle with the lift area of the sill flange, center-ing the jack saddle between the locatin

WARNING!Raising the vehicle higher than necessary can makethe vehicle less stable. It could slip off the jack andhurt someone near it. Raise the vehic

NOTE:• For vehicles so equipped, do not attempt to install acenter cap or wheel cover on the compact spare.• Refer to “Compact Spare Tire” and to “Lim

10. Lower the vehicle to the ground by turning the jackhandle counterclockwise.11. Finish tightening the wheel bolts. Push down on thewrench while at

3. Align the valve notch in the wheel cover with thevalve stem on the wheel. Install the cover by hand,snapping the cover over the two wheel bolts. Do

6. Finish tightening the wheel bolts. Push down on thewrench while at the end of the handle for increasedleverage. Tighten the wheel bolts in a star p

each wheel bolt has been tightened twice. Refer to“Torque Specifications” in this section for the properlug bolt torque. If in doubt about the correct

Preparations For Jump-StartThe battery in your vehicle is located in the front of theengine compartment, behind the left headlight assembly.WARNING!•

NOTE: The adjustable upper shoulder belt anchorage isequipped with an Easy Up feature. This feature allowsthe shoulder belt anchorage to be adjusted i

3. If using another vehicle to jump-start the battery, parkthe vehicle within the jumper cables reach, set theparking brake and make sure the ignition

WARNING!Do not connect the jumper cable to the negative (-)post of the discharged battery. The resulting electri-cal spark could cause the battery to

CAUTION!Accessories plugged into the vehicle power outletsdraw power from the vehicle’s battery, even when notin use (i.e., cellular phones, etc.). Ev

CAUTION!Racing the engine or spinning the wheels may lead totransmission overheating and failure. Allow the en-gine to idle with the transmission in N

MANUAL PARK RELEASEWARNING!Always secure your vehicle by fully applying theparking brake, before activating the Manual ParkRelease. Activating the Man

2. Using a small screwdriver or similar tool, remove theManual Park Release access cover, which is under-neath the rubber storage bin liner in the cen

4. Pull the tether to rotate the lever up and rearward,until it locks vertically in place. Verify that the ManualPark Release lever is locked in the r

TOWING A DISABLED VEHICLEThis section describes procedures for towing a disabledvehicle using a commercial towing service.Towing Condition Wheel OFF t

• This recovery tow feature is recommended to be usedby a trained professional only.• Use approved receptacle location to free the disabledvehicle fro

If the key fob is unavailable, or the vehicle’s battery isdischarged, refer to “Manual Park Release” in this sectionfor instructions on shifting the t

Pregnant women should wear the lap part of the seat beltacross the thighs and as snug across the hips as possible.Keep the seat belt low so that it do

CAUTION!Towing this vehicle in violation of the above require-ments can cause severe transmission damage. Dam-age from improper towing is not covered

MAINTAINING YOUR VEHICLECONTENTS! ENGINE COMPARTMENT — 2.4L ...581! ENGINE COMPARTMENT — 3.6L ...582! ONBOARD DIAGNOSTIC SYSTEM — OBD II

▫ Automatic Transmission ...609▫ Appearance Care And Protection FromCorrosion ...611! FUSES ...

ENGINE COMPARTMENT — 2.4L1 — Air Cleaner Filter 5 — Power Distribution Center (Fuses)2 — Engine Coolant Pressure Cap 6 — Battery3 — Oil Fill Cap 7 — W

ENGINE COMPARTMENT — 3.6L1 — Engine Coolant Reservoir 5 — Washer Fluid Reservoir2 — Engine Oil Filter Access Cover 6 — Battery3 — Brake Fluid Reservoi

ONBOARD DIAGNOSTIC SYSTEM — OBD IIYour vehicle is equipped with a sophisticated onboarddiagnostic system called OBD II. This system monitorsthe perfor

further information. Tighten the fuel filler cap until a“clicking” sound is heard. This is an indication that thefuel filler cap is properly tightened

3. Approximately 15 seconds later, one of two things willhappen:• The MIL will flash for about 10 seconds and thenreturn to being fully illuminated un

DEALER SERVICEYour authorized dealer has the qualified service person-nel, special tools, and equipment to perform all serviceoperations in an expert

CAUTION! (Continued)• Your vehicle has been built with improved fluidsthat protect the performance and durability of yourvehicle and also allow extend

Restraints” section of this manual. The table belowdefines the type of feature for each seating position.If the passenger seating position is equipped

CAUTION!Overfilling or underfilling the crankcase will causeaeration or loss of oil pressure. This could damageyour engine.Change Engine OilThe oil ch

Engine Oil Viscosity (SAE Grade) — 2.4L EngineMOPAR® SAE 0W-20 engine oil or equivalent Pennzoil®or Shell Helix® is recommended for all operating tem-

Materials Added To Engine OilThe manufacturer strongly recommends against the ad-dition of any additives (other than leak detection dyes) tothe engine

WARNING!The air induction system (air cleaner, hoses, etc.) canprovide a measure of protection in the case of enginebackfire. Do not remove the air in

WARNING! (Continued)• Battery gas is flammable and explosive. Keepflame or sparks away from the battery. Do not usea booster battery or any other boos

WARNING!• Use only refrigerants and compressor lubricantsapproved by the manufacturer for your air condi-tioning system. Some unapproved refrigerants

Refrigerant Recovery And Recycling HFO 1234yf— If EquippedHFO 1234yf Air Conditioning Refrigerant is a hydro-fluorocarbon (HFC) that is endorsed by th

3. Pull down the passenger hush panel under the dashpanel4. Remove the filter door by pushing down the tab on thetop of the door to release the cover

6. Install the A/C air filter with the air filter positionindicators pointing in the same direction as removal.CAUTION!The A/C air filter is identifie

the application of any lubricant, the parts concernedshould be wiped clean to remove dust and grit; afterlubricating excess oil and grease should be r

INTRODUCTIONCongratulations on selecting your new Chrysler GroupLLC vehicle. Be assured that it represents precisionworkmanship, distinctive styling,

WARNING!• Never place a rear-facing child restraint in front ofan air bag. A deploying Passenger Advanced FrontAir Bag can cause death or serious inju

windshield washer solvent (not radiator antifreeze) andoperate the system for a few seconds to flush out theresidual water.When refilling the washer f

WARNING!• Exhaust gases can injure or kill. They containcarbon monoxide (CO), which is colorless andodorless. Breathing it can make you unconsciousand

Under normal operating conditions, the catalytic con-verter will not require maintenance. However, it is im-portant to keep the engine properly tuned

Engine Coolant ChecksCheck the engine coolant (antifreeze) protection every 12months (before the onset of freezing weather, whereapplicable). If the e

Selection Of CoolantRefer to “Fluids, Lubricants, and Genuine Parts” in“Maintaining Your Vehicle” for further information.CAUTION!• Mixing of engine c

CAUTION! (Continued)• Do not use water alone or alcohol-based enginecoolant (antifreeze) products. Do not use additionalrust inhibitors or antirust pr

• Use only high purity water such as distilled or deion-ized water when mixing the water/engine coolant(antifreeze) solution. The use of lower quality

WARNING!• Do not open hot engine cooling system. Never addengine coolant (antifreeze) when the engine isoverheated. Do not loosen or remove the cap to

When additional engine coolant (antifreeze) is needed tomaintain the proper level, only OAT coolant that meetsthe requirements of Chrysler Material St

• Do not change the thermostat for Summer or Winteroperation. If replacement is ever necessary, installONLY the correct type thermostat. Other designs

WARNING! (Continued)• Do not use the Automatic Locking Mode to restrainoccupants who are wearing the seat belt or childrenwho are using booster seats.

Use only manufacturer’s recommended brake fluid. Re-fer to “Fluids, Lubricants, and Genuine Parts” in “Main-taining Your Vehicle” for further informat

WARNING! (Continued)• Do not allow petroleum based fluid to contaminatethe brake fluid. Brake seal components could bedamaged, causing partial or comp

CAUTION!Do not use chemical flushes in your transmission asthe chemicals can damage your transmission compo-nents. Such damage is not covered by the N

Appearance Care And Protection From CorrosionProtection Of Body And Paint From CorrosionVehicle body care requirements vary according to geo-graphic l

• If insects, tar, or other similar deposits have accumu-lated on your vehicle, use MOPAR® Super Kleen Bugand Tar Remover to remove.• Use a high quali

• If you carry special cargo such as chemicals, fertilizers,de-icer salt, etc., be sure that such materials are wellpackaged and sealed.• If a lot of

Stain Repel Fabric Cleaning Procedure — IfEquippedStain Repel seats may be cleaned in the following man-ner:• Remove as much of the stain as possible

Your leather upholstery can be best preserved by regularcleaning with a damp soft cloth. Small particles of dirtcan act as an abrasive and damage the

cleaner. Use caution when cleaning the inside rear win-dow equipped with electric defrosters or the right rearquarter window equipped with the radio a

WARNING!A frayed or torn belt could rip apart in a collision andleave you with no protection. Inspect the belt systemperiodically, checking for cuts,

Advanced Front Air BagsThis vehicle has Advanced Front Air Bags for both thedriver and front passenger as a supplement to the seatbelt restraint syste

Power Distribution Center (Fuses)The Power Distribution Center is located in the enginecompartment near the battery. This center contains car-tridge f

Cavity Blade Fuse Cartridge Fuse DescriptionF09 – – Not UsedF10 20 Amp Yellow – Power Transfer Unit(PTU) – If EquippedF11 – – Not UsedF12 20 Amp Yello

Cavity Blade Fuse Cartridge Fuse DescriptionF16 20 Amp Yellow – Powertrain / IgnitionCoilF17 – – Not UsedF18 – – Not UsedF19 – 40 Amp Green Starter So

Cavity Blade Fuse Cartridge Fuse DescriptionF25B 20 Amp Yellow – Front Washer Pump – IfEquipped with Stop/StartOptionF26 – – Not UsedF27 – – Not UsedF

Cavity Blade Fuse Cartridge Fuse DescriptionF36 – – Not UsedF37 – 50 Amp Red Radiator Fan PWM Con-trollerF38 – – Not UsedF39 – 40 Amp Green HVAC Blowe

Cavity Blade Fuse Cartridge Fuse DescriptionF45 – 30 Amp Pink Passenger Door Module(PDM) – If EquippedF46 – 25 Amp Clear Sunroof – If EquippedF47 – –

Cavity Blade Fuse Cartridge Fuse DescriptionF55 10 Amp Red – Blind Spot Sensors/Compass/Rearview Cam-era – If EquippedF56 15 Amp Blue – Ignition Node

Cavity Blade Fuse Cartridge Fuse DescriptionF62 – – Not UsedF63 20 Amp Yellow – Front Heated Seats – IfEquippedF64 20 Amp Yellow – Heated Steering Whe

Cavity Blade Fuse Cartridge Fuse DescriptionF67 10 Amp Red – In Car TemperatureSensor/Humidity Sensor/Drivers Assist SystemModule (DASM)/ParkAssist (P

Cavity Blade Fuse Cartridge Fuse DescriptionF72 10 Amp Red – Heated Mirrors – IfEquippedF73 – – Not UsedF74 – 30 Amp Pink Rear Defroster/DefoggerF75 2

WARNING!• Being too close to the steering wheel or instrumentpanel during Advanced Front Air Bag deploymentcould cause serious injury, including death

Cavity Blade Fuse Cartridge Fuse DescriptionF80 20 Amp Yellow – RadioF81 – – Not UsedF82 – – Not UsedF83 – 20 Amp Blue Engine Control Module(ECM)F84 –

Cavity Blade Fuse Cartridge Fuse DescriptionF88 10 Amp Red – Collision Mitigation Mod-ule (CMM)/Electrochromatic Mirror/Haptic Lane FeedbackModule (Ha

Cavity Blade Fuse Cartridge Fuse DescriptionF95 10 Amp Red – Electrochromatic Mirror/Rain/Pass. Window SW/Power Outlet ConsoleIllumination/Sensor/Sunr

Interior FusesThe interior fuse panel is located in the passenger com-partment on the left side dash panel under the instru-ment panel.Cavity Blade Fu

Cavity Blade Fuse DescriptionF53 7.5 Amp Brown UCI Port (USB & AUX)F89 5 Amp Tan Trunk LampF91 5 Amp Tan Fog Lamp Front LeftF92 5 Amp Tan Fog Lamp

REPLACEMENT BULBSInterior BulbsBulb NumberFront Courtesy/Reading Lamp 578/W5WCenter Courtesy/Reading Lamp 578/W5WVisor Vanity Lamp A6220Glove Box Lamp

Exterior BulbsBulb NumberHigh Intensity Discharge Headlamp HID (Serviced at Authorized Dealer)Bi-Halogen Headlamp HIR2Daytime Running Lamp LED (Servic

BULB REPLACEMENTNOTE: Lens fogging can occur under certain atmo-spheric conditions. This will usually clear as atmosphericconditions change to allow t

Bi-Halogen Headlamps1. Remove the top pushpin on the headlamp access doorin the wheel liner to access the headlamp assembly.2. Reach behind the headla

4. Firmly grasp the headlamp bulb socket assembly androtate counterclockwise to remove from the housing.5. Disconnect the bulb from the electrical con

Advanced Front Air Bag FeaturesThis vehicle is equipped with a right front passengerOccupant Classification System (“OCS”) that is designedto provide

6. Install the bulb and connector assembly into theheadlamp housing and rotate clockwise to lock it inplace.7. Install the headlamp bulb cap in the he

4. Twist the front turn signal lamp socket assemblycounterclockwise, and then remove the front turnsignal lamp assembly from the lamp housing.5. Pull

Front Side Marker Lamps1. Remove the three fasteners from the inner wheel linerand carefully peel back liner for access.2. Firmly grasp the front side

Front Fog Lamp1. Remove the three fasteners from the lower closeout,and peel down the lower closeout.2. Reach behind the fog lamp housing to access th

CAUTION!Do not touch the new bulb with your fingers. Oilcontamination will severely shorten bulb life. If thebulb comes in contact with any oily surfa

6. Rotate the backup lamp socket counter clockwise 1/4turn to remove the backup lamp socket from the trunklid lamp housing.Backup Lamp Socket7. Remove

NOTE: passenger side shown the drivers side is similar.Backup Lamp Socket5. Rotate the backup lamp socket counter clockwise 1/4turn to remove the back

Stop/Rear Turn Signal Lamp1. Open the trunk lid.2. Remove the tail lamp housing beauty cover by grasp-ing the top edge and pulling rearward to expose

NOTE: It may be necessary to use significant force toremove the two out bored ball studs from the socketfasteners to remove the tail lamp housing.5. R

FLUID CAPACITIESU.S. MetricFuel (Approximate)2.4L and 3.6L Engines 15.8 Gallons 60 LitersEngine Oil With Filter2.4 Liter Engine (SAE 0W-20, API Certif

Advanced Front Air Bag OperationAdvanced Front Air Bags are designed to provide addi-tional protection by supplementing the seat belts. Ad-vanced Fron

FLUIDS, LUBRICANTS AND GENUINE PARTSEngineComponent Fluid, Lubricant, or Genuine PartEngine Coolant We recommend you use MOPAR® Antifreeze/Coolant 10

Component Fluid, Lubricant, or Genuine PartSpark Plugs – 3.6L Engine We recommend you use MOPAR® Spark Plugs.Fuel Selection – 2.4L Engine 87 OctaneFue

CAUTION!• Mixing of engine coolant (antifreeze) other thanspecified Organic Additive Technology (OAT) en-gine coolant (antifreeze), may result in engi

ChassisComponent Fluid, Lubricant, or Genuine PartAutomatic Transmission Use only MOPAR® ZF 8&9 Speed ATF™ AutomaticTransmission Fluid, or equival

MAINTENANCE SCHEDULESCONTENTS! MAINTENANCE SCHEDULE ...654 ▫ Maintenance Chart ...6568MAINTENANCESCHEDULES

MAINTENANCE SCHEDULEYour vehicle is equipped with an automatic oil changeindicator system. The oil change indicator system willremind you that it is t

• Check tire pressure and look for unusual wear ordamage. Rotate tires at the first sign of irregular wear,even if it occurs before the oil indicator

Maintenance ChartMileage:20,00030,00040,00050,00060,00070,00080,00090,000100,000110,000120,000130,000140,000150,000Or Years: 2 3 4 5 6 7 8 9 10 11 12

Mileage:20,00030,00040,00050,00060,00070,00080,00090,000100,000110,000120,000130,000140,000150,000Or Years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15Or Kilome

Occupant Classification System (OCS) — FrontPassenger SeatThe OCS is part of a Federally regulated safety system forthis vehicle. It is designed to pr

WARNING!• You can be badly injured working on or around amotor vehicle. Do only service work for which youhave the knowledge and the right equipment.

IF YOU NEED CONSUMER ASSISTANCECONTENTS! SUGGESTIONS FOR OBTAINING SERVICE FORYOUR VEHICLE ...661▫ Prepare For The Appointment...

! DEPARTMENT OF TRANSPORTATION UNIFORMTIRE QUALITY GRADES ...667▫ Treadwear...667▫ Traction Grades ...

SUGGESTIONS FOR OBTAINING SERVICE FORYOUR VEHICLEPrepare For The AppointmentIf you are having warranty work done, be sure to havethe right papers with

facilities, factory-trained technicians, special tools, andthe latest information to ensure the vehicle is fixedcorrectly and in a timely manner.This

Mexico, D. F.In Mexico City: 5081-7568Outside Mexico City: 1-800-505-1300Customer Assistance For The Hearing Or SpeechImpaired (TDD/TTY)To assist cust

Vehicle Limited Warranty expires, please refer to thecontract documents, and contact the person listed inthose documents.We appreciate that you have m

REPORTING SAFETY DEFECTSIn The 50 United States And Washington, D.C.If you believe that your vehicle has a defect that couldcause a crash or cause inj

NOTE: A street address is required when orderingmanuals (no P.O. Boxes).Service ManualsThese comprehensive Service Manuals provide the infor-mation th

DEPARTMENT OF TRANSPORTATION UNIFORMTIRE QUALITY GRADESThe following tire grading categories were established bythe National Highway Traffic Safety Ad

• The front passenger seat is occupied by a rear-facingchild restraint; or• The front passenger is not properly seated or his or herweight is taken of

Temperature GradesThe temperature grades are A (the highest), B, and C,representing the tire’s resistance to the generation of heatand its ability to

INDEX10

About Your Brakes ...471ABS (Anti-Lock Brake System) ...472Adaptive Cruise Control (ACC) (Cruise Control) . . .180Ad

AlarmArm The System ...19Disarm The System ...19Rearming The System ...18Tamper Alert ...

Belts, Seat...109Body Mechanism Lubrication ...596B-Pillar Location ...491Brake Assis

Center Seat LATCH ...97Child Restraints ...84Child Seat Installation ...101How To Stow An Un

Cruise Control (Speed Control)...180Cupholders ...296Customer Assistance ...661Data Recorde

DrivingThrough Flowing, Rising, or Shallow StandingWater ...461E-85 Fuel ...525Electrical Powe

Fails to Start ...440Flooded, Starting ...440Fuel Requirements ...521Jump Starting ...

Replacement Parts ...529Starting ...528Flooded Engine Starting ...440Floor Console ...

The OCS determines the front passenger’s most probableclassification. The OCS estimates the seated weight onthe front passenger seat and where that we

GaugesCoolant Temperature ...323Fuel ...321Speedometer ...316Tachometer ...

Illuminated Entry ...21Courtesy Lights ...21Front Courtesy Overhead Console ...21Illuminated Ent

Passive Entry ...35Passive Entry Programming ...35Remote Control ...35Unlock From The Drive

High Beam ...164High Beam Indicator ...321High Beam/Low Beam Select ...164Illuminated Entry ...

Manual, Service ...665Marker Lights, Side...638Master Cylinder (Brakes) ...607Memory Feat

Synthetic ...589Viscosity ...589Oil Filter, Change ...590Oil Filter, Selecti

Rain Sensitive Wiper System ...172Rear Camera ...268Rear Cupholder ...296Rear ParkSense

Replacement Parts...585Replacement Tires ...506Reporting Safety Defects ...665Restraint,

Operating Instructions ...51Pregnant Women ...55Pretensioners ...56Rear Seat ...

SpecificationsFuel (Gasoline) ...648Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .648Speed Control (Cruis

the inflation rate of the Passenger Advanced Front AirBag. This does not mean that the OCS is workingimproperly.Do not decrease OR increase the front

Tire Markings ...483Tires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111Aging (Life of Tires) ...

Transmission ...450Automatic ...450Maintenance ...609Transmitter Battery Ser

WaterDriving Through ...461Wheel and Wheel Trim ...613Wheel and Wheel Trim Care ...613Wind Buffet

INSTALLATION OF RADIO TRANSMITTINGEQUIPMENTSpecial design considerations are incorporated into thisvehicle’s electronic system to provide immunity to

To w n & C o u n t r yChrysler Group LLC O W N E R ’ S M A N U A L2015 2 0 1 5 T o w n & C o u n t r y15Y531-126-AA First Edition

1INTRODUCTION 5

• Objects are lodged between the front passenger seatand center console.• Accessories that may change the seated weight on thefront passenger seat are

Not Seated Properly Not Seated Properly2THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69

WARNING!• If an occupant in the front passenger seat is seatedimproperly, the occupant may provide an outputsignal to the OCS that is different from t

WARNING! (Continued)• Placing an object on the floor under the frontpassenger seat may prevent the OCS from workingproperly, which may result in serio

• Do not add a secondary seat cover or mat.• At no time should any Supplemental Restraint System(SRS) component or SRS related component or fastenerbe

Supplemental Driver And Front Passenger KneeAir BagsThis vehicle is equipped with a Supplemental DriverKnee Air Bag mounted in the instrument panel be

When the SAB deploys, it opens the seam on the out-board side of the seatback’s trim cover. The inflating SABdeploys through the seat seam into the sp

SABICs may help reduce the risk of head injury to frontand rear seat outboard occupants. SABICs may reducethe risk of injuries in certain side impact

The SABICs and SABs (“Side Air Bags”) are designed toactivate in certain side impacts and certain rolloverevents. The Occupant Restraint Controller (“

WARNING! (Continued)• Relying on the Side Air Bags alone could lead tomore severe injuries in a collision. The Side AirBags work with your seat belt t

WARNINGS AND CAUTIONSThis Owners Manual contains WARNINGS against op-erating procedures that could result in a collision orbodily injury. It also cont

event may be in progress and whether deployment isappropriate. A slower-developing event may deploy theseat belt pretensioners on both sides of the ve

Do not drive your vehicle after the air bags have de-ployed. If you are involved in another collision, the airbags will not be in place to protect you

System Reset ProcedureIn order to reset the Enhanced Accident Response Systemfunctions after an event, the ignition switch must bechanged from ignitio

free, if any of the following occurs, have an authorizeddealer service the air bag system immediately.• The Air Bag Warning Light does not come on dur

The Redundant Air Bag Warning Light will stay on untilthe fault is cleared. In addition, a single chime will soundto alert you that the Redundant Air

WARNING! (Continued)• Do not attempt to modify any part of your air bagsystem. The air bag may inflate accidentally or maynot function properly if mod

These data can help provide a better understanding ofthe circumstances in which crashes and injuries occur.NOTE: EDR data are recorded by your vehicle

WARNING!In a collision, an unrestrained child can become aprojectile inside the vehicle. The force required tohold even an infant on your lap could be

Summary Of Recommendations For Restraining Children In VehiclesChild Size, Height, Weight Or Age Recommended Type Of Child RestraintInfants and Toddle

Infants And Child RestraintsSafety experts recommend that children ride rear-facingin the vehicle until they are two years old or until theyreach eith

NOTE: It is illegal to remove or alter the VIN.VEHICLE MODIFICATIONS/ALTERATIONSWARNING!Any modifications or alterations to this vehicle couldseriousl

remain in a forward-facing child seat with a harness foras long as possible, up to the highest weight or heightallowed by the child seat.All children

WARNING! (Continued)• When your child restraint is not in use, secure it inthe vehicle with the seat belt or LATCH anchor-ages, or remove it from the

WARNING!Never allow a child to put the shoulder belt under anarm or behind their back. In a crash, the shoulder beltwill not protect a child properly,

Recommendations For Attaching Child RestraintsRestraint Type CombinedWeight of theChild + ChildRestraintUse any attachment method shown with an “X” Be

Lower Anchors And Tethers For Children (LATCH)Restraint SystemYour vehicle is equipped with the child restraint anchor-age system called LATCH, which

LATCH Positions For Installing Child Restraints InThis Vehicle•Lower Anchorage Symbol 2 anchorages perseating position•Top Tether Anchorage Symbol2THI

What is the weight limit (child’sweight + weight of the child re-straint) for using the LATCH an-chorage system to attach thechild restraint?65 lbs (2

Can two child restraints be at-tached using a common lowerLATCH anchorage?No Never “share” a LATCH anchorage withtwo or more child restraints. If the

Locating The LATCH AnchoragesThe lower anchorages are round bars that arefound at the rear of the seat cushion where itmeets the seatback, below the a

LATCH-compatible child restraint systems will beequipped with a rigid bar or a flexible strap on each side.Each will have a hook or connector to attac