Chrysler 2005 300 SRT8 Uživatelský manuál

TABLE OF CONTENTSSECTION PAGE1INTRODUCTION...32THINGS TO KNOW BEFORE STARTING YOUR VEHICLE..

䡵 Windows...23▫ Power Windows ...23䡵 Trunk Lock And Release...26䡵 Trunk Safety Warning...

Automatic HeadlightsThis system automatically turns your headlights ON orOFF based on ambient light levels. To turn the systemON, rotate the headlamp

If the headlights are turned off before the ignition, theywill turn off in the normal manner.NOTE:The lights must be turned off within 45 secondsof tu

WINDSHIELD WIPERS AND WASHERSThe wipers and washers are operated by themulti-function lever. The lever is located on theleft side of the steering colu

Rain Sensing WipersThis feature senses moisture on the windshield andautomatically activates the wipers for the driver. Thefeature is especially usefu

Headlamps On With WipersThe headlights will turn on approximately 10 secondsafter the wipers are turned on if the headlight switch isplaced in the AUT

The washer fluid reservoir will hold a full gallon of fluidwhen “Low Washer Fluid” appears in the ElectronicVehicle Information Center.Headlight Washe

Adding Washer FluidThe headlamp washer system and windshield washersystem share the same fluid reservoir. The reservoir islocated in the front of the

WARNING!Moving the steering column while the vehicle ismoving is dangerous. Without a stable steering col-umn you could lose control of the vehicle an

To improve the vehicle’s traction when driving withsnow chains, or starting off in deep snow, sand or gravel,switch off the TCS system by pressing the

WARNING!BAS cannot prevent the natural laws of physics fromacting on the vehicle, nor can it increase brakingefficiency beyond that afforded by the co

A WORD ABOUT YOUR KEYSYou can insert the double sided keys into the locks witheither side up.The dealer that sold you your new vehicle has the keycode

The ESP enhances directional control and reduces drivingwheel spin of the vehicle under various driving condi-tions. The system operates when the vehi

wheel slip control is active at vehicle speeds betweenapproximately 24 mph (40 km/h) and 50 mph (80 km/h).CAUTION!If the vehicle is towed with the fro

To Activate:Push and release the speed control lever (“ON/OFF”)once and an LED on the lever will illuminate indicatingthat the electronic speed contro

Pushing the lever up and releasing (“ACC/RES”) oncewill result in a 1 mph (1.6 km/h) speed increase. Eachtime the lever is pushed up and released, spe

OVERHEAD CONSOLEThe overhead console contains courtesy/reading lights,an optional universal garage door opener (HomeLink威),storage for sunglasses, and

GARAGE DOOR OPENERThe HomeLink威 Universal Transceiver replaces up tothree remote controls (hand held transmitters) that oper-ate devices such as garag

The Electronic Vehicle Information Center (EVIC) fea-tures a driver-interactive display which includesHomeLink system messages. The EVIC is located in

WARNING!Your motorized door or gate will open and closewhile you are training the Universal Transceiver. Donot train the transceiver if people or pets

complete the programming of a rolling code equippeddevice (most common garage door openers require thisstep.6. At the garage door opener receiver (mot

display will show “Channel X Trained” (where X isChannel 1, 2, or 3). Proceed with ⬙Programming⬙ stepfour to complete.Using HomeLinkTo operate, simply

information center (EVIC). Refer to Personal Settings inthe Electronic Vehicle Information Center (EVIC) Sectionfor details.WARNING!Leaving children i

This device complies with part 15 of FCC rules and withRSS-210 of Industry Canada. Operation is subject to thefollowing conditions:•This device may no

WARNING!•Never leave children in a vehicle, with the keys inthe ignition switch. Occupants, particularly unat-tended children, can become entrapped by

Pinch Protect OverrideIf a known obstruction (ice, debris, etc.) prevents closing,press the switch forward and hold for two seconds afterthe reversal

Until Exit” under “Personal Settings” in the ElectronicVehicle Information Center section of this manual fordetails.Sunroof Fully ClosedPress the swit

The center console outlet is powered directly from thebattery (power available at all times). Items plugged intothis outlet may discharge the battery

CUPHOLDERSFront Seat CupholdersThe cupholders are located in the forward edge of thecenter console.Push down on the cover as shown to expose the cupho

STORAGEConsole FeaturesThe center console includes a large internal storage bin.The storage bin has a rubber mat for noise control. Thebin is also lar

•Place as much cargo as possible in front of the rearaxle. Too much weight or improperly placed weightover or behind the rear axle can cause the rear

UNDERSTANDING YOUR INSTRUMENT PANELCONTENTS䡵 Instruments And Controls...132䡵 Premium Instrument Cluster...133䡵 Instrument Clus

The Sentry Key Immobilizer System does not need to bearmed or activated. Operation of the system is automaticregardless of whether or not the vehicle

▫ Scan Button ...156▫ Changing Tape Direction ...156▫ Metal Tape Selection ...156▫ Pinch Roller Rel

▫ CD Player ...168▫ Satellite ...168䡵 Radio General Information...168▫ Radio Broadcast Sig

INSTRUMENTS AND CONTROLS132 UNDERSTANDING YOUR INSTRUMENT PANEL

PREMIUM INSTRUMENT CLUSTERUNDERSTANDING YOUR INSTRUMENT PANEL 1334

INSTRUMENT CLUSTER DESCRIPTIONS1. Oil Pressure Warning LightThis light shows low engine oil pressure. Thelight should turn on momentarily when theengi

8. Engine Temperature Warning LightThis light illuminates, and will be accompaniedby a single chime to warn of an overheatedengine condition. The engi

12. Brake System Warning LightThis light monitors various brake functions,including brake fluid level and parkingbrake application. If the brake light

The light also will turn on when the parking brake isapplied with the ignition switch in the ON position.NOTE:This light shows only that the parking b

15. Trip Odometer ButtonPress this button to change the display from odometer toeither of the two trip odometer settings. The letter “A” or“B” will ap

and remain on briefly as a bulb check. If the light doesnot come on during starting, have the system checkedby an authorized dealer.21. Voltage LightT

At the time of purchase, the original owner is providedwith a four digit PIN number. This number is requiredfor dealer replacement of keys. Duplicatio

ELECTRONIC VEHICLE INFORMATION CENTER(EVIC)The Electronic Vehicle Information Center (EVIC) fea-tures a driver-interactive display. It is located in t

Use the SCROLL buttons to scroll through TripFunctions, Navigation (If Equipped), SystemWarnings, System Status Messages, and Per-sonal Settings (Cust

•Trunk Ajar (with a single chime)•Low Washer Fluid (with a single chime)•Adjustable Pedals Disabled – Cruise Engaged (with asingle chime) — only avail

•Trip BShows the total distance travelled for trip B since the lastreset.•Elapsed TimeShows the total elapsed time of travel since the last resetwhen

FUNCTION SELECT button to start the calibration. Themessage “CAL” will appear in the EVIC. Complete oneor more 360° turns in an area free from large m

To set the variance: Turn the ignition switch ON. Pressand hold the compass button for approximately 2 sec-onds. Use the SCROLL buttons until “Compass

The EVIC displays this symbol to indicate thatyou have voice mail.The EVIC displays this symbol to indicate atext message.The EVIC displays this symbo

Turn By Turn DirectionsIf Turn by Turn Navigation is enabled through PersonalSettings, the Navigation System will provide turn by turndirections to th

Press and release the FUNCTION SELECT button whenin this display until “US” or “METRIC” appears to makeyour selection.Lock Doors Automatically at 15 M

Flash Lights with Remote Key LockWhen ON is selected, the front and rear turn signals willflash when the doors are locked or unlocked using theremote

General InformationThe Sentry Key system complies with FCC rules part 15and with RSS-210 of Industry Canada. Operation issubject to the following cond

Turn Headlamps on with Remote Key UnlockWhen this feature is selected the headlamps will activateand remain on for up to 90 seconds when the doors are

SETTING THE ANALOG CLOCKTo set the analog clock at the top center of the instrumentpanel, press and hold the button until the setting iscorrect.SALES

Power Switch/Volume Control (Rotary)Press the ON/VOL control to turn the radio ON. Pressthe ON/VOL a second time to turn OFF the radio.Electronic Volu

4. Adjust the minutes using the right side Tune / Audiocontrol.5. To exit, press any button/knob or wait 5 seconds.INFO Button (Radio Mode)Press the I

RND/PTY Button (Radio Mode)Pressing this button once will turn on the PTY mode for5 seconds. If no action is taken during the 5 second timeout the PTY

If a preset button is activated while in the PTY (ProgramType) mode, the PTY mode will be exited and the radiowill tune to the preset station.NOTE:If

Tape EjectPress this button and the cassette will disen-gage and eject from the radio.Scan ButtonPress this button to play 10 seconds of each selectio

Inserting Compact Disc(s)CAUTION!This CD player will accept 4 3/4 inch (12 cm) discsonly. The use of other sized discs may damage theCD player mechani

Radio display will show ⬙EJECTING DISC⬙ when the discis being ejected and prompt the user to remove the disc.Press and hold the LOAD/ EJT button for 5

Press and hold the FF button to fast forward through thetracks. Release the FF button to stop the fast forwardfeature. If the RW button is pressed, th

WARNING!•For personal security and safety in the event of anaccident, lock the vehicle doors as you drive aswell as when you park and leave the vehicl

Supported MP3 File FormatsThe radio will recognize only files with the *.mp3 exten-sion as MP3 files. Non-MP3 files named with the *.mp3extension may

To increase the speed of disc loading, it is recommendedto use CD-R media and single-session discs. To create asingle-session disc, enable the Disc at

INFO Button (CD Mode for MP3 Play)Press and INFO button while playing MP3 or WMA disc.The radio scrolls through the following TAG information:Song Tit

Operating Instructions - Video EntertainmentSystem (VES) (If Equipped)Refer to separate Video Entertainment System (VES)Guide.SATELLITE RADIO — IF EQU

simultaneously for 3 seconds. All twelve ESN/SID num-bers will be displayed. The radio will exit the ESN/SIDmode when any other button is pushed, the

Storing and Selecting Pre-Set ChannelsIn addition to the 12 AM and 12 FM pre-set stations, youmay also commit 12 satellite stations to push buttonmemo

•Placing objects over or too close to the antenna cancause signal blockage.NAVIGATION SYSTEM (SALES CODE REC) — IFEQUIPPEDNavigation Radio with CD Pla

The VOLUME switch controls the volume ofthe sound system. Pressing the top of therocker switch will increase the volume andpressing the bottom of the

If you press the switch up or down twice it plays thesecond selection, three times, it will play the third, etc.Press the FUNCTION SELECT button to sw

Electrical DisturbancesRadio waves may pick up electrical disturbances duringtransmission. They mainly affect the wave amplitude,and thus remain a par

Automatic Door LocksThe doors will lock automatically on vehicles with powerdoor locks if all of the following conditions are met:1. The Auto Lock fea

Maintain your cassette tape player. The head and capstanshaft in the cassette player can pick up dirt or tapedeposits each time a cassette is played.

RADIO OPERATION AND CELLULAR PHONESUnder certain conditions, the cellular phone being On inyour vehicle can cause erratic or noisy performance fromyou

system to maintain by rotating the driver’s or passenger’scontrol knob. Once the comfort level is selected thesystem will maintain that level automati

•Under certain conditions (after the vehicle is turnedoff) the climate control system may recalibrate and anoise may be heard for 20 seconds. This is

174 UNDERSTANDING YOUR INSTRUMENT PANEL

The operator can override the AUTO mode setting andselect the direction of the air by rotating the right modeknob to one of the following positions.•D

ON. The defroster automatically turns off after approxi-mately 10 minutes of operation for the first push of thebutton, and will turn off after approx

Winter OperationUse of the air Recirculation mode during winter monthsis not recommended because it may cause windowfogging.NOTE:See Operating Tips ch

Operating Tips178 UNDERSTANDING YOUR INSTRUMENT PANEL

STARTING AND OPERATINGCONTENTS䡵 Starting Procedures...181▫ Normal Starting ...181䡵 Transmission Shifting...

Child Protection Door LockTo provide a safer environment for small children ridingin the rear seats, the rear doors are equipped with a childprotectio

▫ Replacement Tires ...209▫ Alignment And Balance ...210䡵 Tire Chains...211䡵 Snow Tires...

STARTING PROCEDURESCAUTION!Long periods of engine idling, especially at highengine speeds, can cause excessive exhaust tempera-tures which can damage

WARNING!•Do not attempt to push or tow your vehicle to getit started. Vehicles equipped with an automatictransmission cannot be started this way. Un-b

After StartingThe idle speed will automatically decrease as the enginewarms up.TRANSMISSION SHIFTING5 Speed Automatic TransmissionWARNING!Unintended m

Park PositionThe PARK position is to be used when parking thevehicle. Engage only with the vehicle stopped. The PARKposition is not intended to serve

NeutralNo power is transmitted from the engine to the driveaxle. When the brakes are released, the vehicle can bemoved freely (pushed or towed). Do no

NOTE:To avoid overrevving the engine when theselector lever is moved in “D -” direction, the transmis-sion will not shift to a lower gear if the engin

1. Stop the vehicle.2. Move the selector lever to the PARK position.3. Turn off the engine.4. Wait approximately 10 seconds.5. Restart the engine.6. M

Automatic Transmission — General InformationCAUTION!Damage to the transmission may occur if the follow-ing precautions are not observed:•Shift into PA

self-calibrating. Therefore, the first few shifts on a newvehicle may be somewhat abrupt or soft until after thebreak-in period. This is a normal cond

REMOTE KEYLESS ENTRYThis system allows you to lock or unlock the doors, openthe trunk, or activate the panic alarm from distances upto about 23 feet (

Brake Transmission Shift Interlock SystemThis vehicle is equipped with a brake transmission shiftinterlock system (BTSI) that holds the gearshift leve

pedal. When the driver wishes to engage autostick,simply move the shift lever to the Left or Right(D-/D+)position while in DRIVE.Hold the shift lever

To release the parking brake, pull out on the parkingbrake release located on the left side of the instrumentpanel.When parking on a hill, it is impor

BRAKE SYSTEMIn the event power assist is lost for any reason (forexample, repeated brake applications with the engineoff), the brakes will still funct

WARNING!•Anti-lock system (ABS) cannot prevent the natu-ral laws of physics from acting on the vehicle, norcan it increase braking or steering efficie

ABS is activated during braking under certain road orstopping conditions. ABS-inducing conditions can in-clude ice, snow, gravel, bumps, railroad trac

POWER STEERINGThe standard power steering system will give you goodvehicle response and increased ease of maneuverabilityin tight spaces. The system w

TIRE SAFETY INFORMATIONTire MarkingsNOTE:•P(Passenger)-Metric tire sizing is based on U.S. designstandards. P-Metric tires have the letter “P” moldedi

Tire Sizing ChartEXAMPLE:Size Designation:P = Passenger car tire size based on U.S. design standardsⴖ...blank...ⴖ = Passenger car tire based on Euro

EXAMPLE:Service Description:95 = Load Index—A numerical code associated with the maximum load a tire can carry.H = Speed Symbol—A symbol indicating th

To lock the doors:Press and release the LOCK button on the transmitter tolock all doors. The turn signal lights will flash once toacknowledge the lock

Tire Identification Number (TIN)The TIN may be found on one or both sides of the tirehowever the date code may only be on one side. Tireswith white si

Tire Loading and Tire PressureTire Placard LocationNOTE:Some vehicles have a “Tire and Loading Infor-mation” placard located on the driver’s side “B”

LoadingThe vehicle maximum load on the tire must not exceedthe load carrying capacity of the tire on your vehicle. Youwill not exceed the tire’s load

6. If your vehicle will be towing a trailer, load from yourtrailer will be transferred to your vehicle. Consult thismanual to determine how this reduc

204 STARTING AND OPERATING

WARNING!Overloading of your tire is dangerous. Overloadingcan cause tire failure, affect vehicle handling, andincrease your stopping distance. Use tir

2. Economy—Improper inflation pressures can cause uneven wearpatterns to develop across the tire tread. These abnormalwear patterns will reduce tread

•This device must accept any interference received,including interference that may cause undesired op-eration.If your Remote Keyless Entry transmitter

VEHICLE THEFT ALARM — IF EQUIPPEDThis system monitors the vehicle doors and ignitionswitch for unauthorized entry or operation. When thealarm is activ

•When the system is armed, the doors can not beunlocked from the interior power door lock switches.The Vehicle Theft Alarm system is designed to prote

The window lock switch on the driver’s door allows youto disable the window controls on the passenger doors.When the lock switch is pressed the window

To close the window part way, lift the window switch tothe first detent and release when you want the window tostop.The power window switches remain a

Wind BuffetingWind buffeting can be described as the perception ofpressure on the ears or a helicopter type sound in theears. Your vehicle may exhibit

With the ignition ON, the trunk open symbol will bedisplayed in the instrument cluster indicating that thetrunk is open. The odometer display will rea

OCCUPANT RESTRAINTSSome of the most important safety features in yourvehicle are the restraint systems. These include the frontand rear seat belts for

Lap/Shoulder BeltsAll seating positions in your vehicle are equipped withLap/Shoulder Belts.The belt webbing retractor is designed to lock duringvery

INTRODUCTIONCONTENTS䡵 Introduction... 4䡵 How To Use This Manual... 4䡵 Warnings And Cautions... 6䡵

2. The seat belt latch plate is above the back of your seat.Grasp the latch plate and pull out the belt. Slide the latchplate up the webbing as far as

4. Position the lap belt across your thighs, below yourabdomen. To remove slack in the lap belt portion, pull upa bit on the shoulder belt. To loosen

WARNING!A frayed or torn belt could rip apart in a collisionand leave you with no protection. Inspect the beltsystem periodically, checking for cuts,

Seat Belt PretensionersThe seat belts for both front seating positions areequipped with pretensioning devices that are designed toremove any slack fro

3. Within 60 seconds of turning the ignition switch to theON position, unbuckle and then re-buckle the driver’sseat belt at least three times within 1

WARNING!Using a seat belt extender when not needed canincrease the risk of injury in a collision. Only usewhen the seat belt is not long enough when i

NOTE:The front airbags are certified to the Federalregulations that allow less forceful deployment.The front airbags have a multistage inflator design

WARNING!• Do not put anything on or around the front airbagcovers or attempt to manually open them. You maydamage the airbags and you could be injured

1. Children 12 years old and under should ride buckledup in the rear seat. Infants in rear-facing child restraintsshould NEVER ride in the front seat

WARNING!•Relying on the airbags alone could lead to moresevere injuries in a collision. The airbags workwith your seat belt to restrain you properly.

INTRODUCTIONThis manual has been prepared with the assistance ofservice and engineering specialists to acquaint you withthe operation and maintenance

How The Airbag System Works•The Occupant Restraint Controller (ORC) determinesif a frontal collision is severe enough to require theairbags to inflate

NOTE:Children 12 years and under should always ridebuckled up in a rear seat in an appropriate child restraint.•The Passenger Air Bag Disable (PAD) In

For almost all properly installed rear facing childrestraints, the PAD indicator light will be illuminatedindicating that the front passenger air bag

this can also affect occupant classification. Also, if youfold down the rear seat check to be sure it doesn’t touchthe front passenger seat.If the fro

•The Occupant Classification Module (OCM) is lo-cated beneath the front passenger seat. The OCMclassifies the occupant into categories based on themea

The following requirements must be strictly adhered to:•Do not modify the front passenger seat assembly orcomponents in any way.•Do not modify the fro

If you do have a collision which deploys the airbags, anyor all of the following may occur:•The nylon airbag material may sometimes cause abra-sions a

Maintaining Your Airbag SystemWARNING!• Modifications to any part of the airbag system couldcause it to fail when you need it. You could beinjured bec

the electronic data may be used by DaimlerChrysler andothers to learn more about the possible causes of crashesand associated injuries in order to ass

•Seatbelt status•Brake status (service and parking brakes)•Accelerator status (including vehicle speed)•Engine control status (including engine speed)

INTRODUCTION 51

•The infant carrier is only used rearward-facing in thevehicle. It is recommended for children who weigh upto about 20 lbs (9 kg). “Convertible” child

•The restraint must be appropriate for your child’sweight and height. Check the label on the restraint forweight and height limits.•Carefully follow t

•Check belt fit periodically. A child’s squirming orslouching can move the belt out of position.•If the shoulder belt contacts the face or neck, move

Installing the LATCH-Compatible Child RestraintSystemWe urge that you carefully follow the directions of themanufacturer when installing your child re

WARNING!Improper installation of a child restraint to theLATCH anchorages can lead to failure of an infant orchild restraint. The child could be badly

To attach a child restraint tether strap:1. Rotate the cover over the anchor directly behind theseat where you are placing the child restraint.2. Rout

Pets should be restrained in the rear seat in pet harnessesor pet carriers that are secured by seat belts.ENGINE BREAK-IN RECOMMENDATIONSA long break-

WARNING!If you are required to drive with the trunk open,make sure that all windows are closed, and theclimate control blower switch is set at high sp

LightsHave someone observe the operation of exterior lightswhile you work the controls. Check turn signal and highbeam indicator lights on the instrum

UNDERSTANDING THE FEATURES OF YOUR VEHICLECONTENTS䡵 Mirrors...63▫ Automatic Dimming Inside Mirror ...63▫ Driver’s Si

WARNINGS AND CAUTIONSThis manual contains WARNINGS against operatingprocedures which could result in an accident or bodilyinjury. It also contains CAU

▫ Memory Feature ...89▫ Programming The Remote Keyless TransmitterFor The Memory Feature ...91▫ Driver’s Seat Glide

䡵 Headlight Washers...105▫ Adding Washer Fluid ...106䡵 Power Tilt/Telescoping Steering Column...106䡵 Traction Contr

▫ Sunroof Maintenance ...122▫ Ignition Off Operation ...122▫ Sunroof Fully Closed ...123䡵 Electrical Po

MIRRORSAutomatic Dimming Inside MirrorWhen the switch is placed in the “AUTO” position themirror will automatically adjust for annoying headlightglare

electronic vehicle information center (EVIC). Refer toElectronic Vehicle Information Center (EVIC) in thismanual for details.Exterior Mirrors Folding

Power mirror preselected positions can be controlled bythe Memory Feature. Refer to the “Seats” section fordetails.Heated Remote Control MirrorsThese

HANDS–FREE COMMUNICATION (UConnect™) —IF EQUIPPEDUConnect™ is a voice-activated, hands-free, in vehiclecommunications system. UConnect™ allows you to

The UConnect™ system can be used with any Hands-Free Profile certified Bluetooth™ cellular phone. If yourcellular phone supports a different profile (

•For each of the feature explanation in this section, onlythe combined form of the voice command is given.You can also break the commands into parts a

•When prompted, after the voice on beep, say ⬙Pair aPhone.⬙•You will be asked to say a four-digit pin number whichyou will later need to enter into yo

VEHICLE MODIFICATIONS / ALTERATIONSWARNING!Any modifications or alterations to this vehiclecould seriously affect its roadworthiness and safetyand may

234-567-890 is nine digits long, which is not a validphone number - the closest valid phone number hasten digits.•The UConnect™ system will confirm th

After you are finished adding an entry into the phone-book, you will be given the opportunity to add morephone numbers to the current entry or to retu

from which you choose. To select one of the entriesfrom the list, press the ⬙Voice Recognition⬙ buttonwhile the UConnect™ system is playing the desire

accessed through the UConnect™ system. Check withyour cellular service provider for the features that youhave.Answer or Reject an Incoming Call - No C

Conference CallWhen two calls are in progress (one active and one onhold), press and hold the ’Phone’ button until you hear adouble beep indicating th

UConnect™ System FeaturesLanguage SelectionTo change the language that the UConnect™ system isusing,•Press the ’Phone’ button to begin.•After the ⬙Rea

The UConnect™ system does slightly lower yourchances of successfully making a phone call as to thatfor the cell phone directly.Your phone must be turn

When calling a number with your UConnect™ systemthat normally requires you to enter in a touch-tonesequence on your cellular phone keypad, you can pus

audio system. The UConnect™ system will work thesame as if you dial the number using voice recognition.NOTE:Certain brands of mobile phones do not sen

If you would like to connect or disconnect the Blue-tooth™ connection between a UConnect™ paired cellularphone and the UConnect™ system, follow the in

•The phone names (along with priority numbers) willbe played.•When prompted say the priority number of the cellu-lar phone (or “All” to delete all pho

•Even though international dialing for most numbercombinations is supported, some shortcut dialingnumber combinations may not be supported.Far End Aud

82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 833

84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

North American EnglishPrimary Alternate(s)Zero OhAdd location Add newAll All of themConfirmation prompts Confirmations promptsDelete a name DeleteLang

WARNING!Drivers must be careful when backing up even whenusing the Rear Park Assist System. Always checkcarefully behind your vehicle, look behind you

SEATSPower SeatsThe power seat switch is on the outboard side of the seatnear the floor. Use this switch to move the driver’s seatup or down, forward

Power Reclining SeatsThe recliner control is on the outboard side of the seat.WARNING!Do not ride with the seatback reclined so that theshoulder belt

controls for each heater are located near the bottomcenter of the instrument panel. After turning on theignition, you can choose from High, Off, or Lo

THINGS TO KNOW BEFORE STARTING YOUR VEHICLECONTENTS䡵 A Word About Your Keys...11▫ Ignition Key Removal ...11▫ Key-In-Ign

The memory feature switch is located on the driver’sdoor panel. The memory switch allows the driver torecall one of two pre-programmed memory profiles

Programming the Remote Keyless Transmitter forthe Memory FeatureYour Remote Keyless Entry Transmitters can be pro-grammed to return the driver’s seat,

This feature can be turned off by performing the follow-ing procedure:1. Press and hold the Set (S) button on the memory seatswitch (located on the dr

Folding Rear SeatThe rear seatbacks can be folded forward to provide anadditional storage area. Pull on the loops shown in theillustration to fold dow

ADJUSTABLE PEDALSThis feature allows both the brake and accelerator pedalsto move toward or away from the driver to provideimproved position with the

CAUTION!Do not place any article under the adjustable pedalsor impede its ability to move as it may cause damageto the pedal controls. Pedal travel ma

Next, move to the outside of the vehicle and push thesafety catch to the left. The safety catch is located underthe center front edge of the hood.Use

LIGHTSOverhead Console Map/Reading LightsThese lights are mounted between the sun visors on theoverhead console. Each light is turned ON by pressingth

Dome Light PositionRotate the dimmer control completely upward to thesecond detent to turn on the interior lights. The interiorlights will remain on w

Multi-Function LeverThe multi-function lever controls the operation of theturn signals, headlight beam selection, and passinglights. The lever is loca